Table of Contents
Advertisement
Chapter 5 - Command Line Interface
Example
Installer# set ClientSta
authentication
bridge-mip
bridge-static-ip
data-encryption-option
default-gw
default-key
dhcpc
distance
key-1
key-2
key-3
key-4
linkrate
mangVLAN
modulation
rtsthreshold
snmp-rocommunity
status-update
txpowerlevel
wireless-essid
Installer#
5.2.4
Partial Keyword Lookup
If you terminate a partial keyword with pressing the tab key twice, alternatives
that match the initial letters are provided. (Remember not to leave a space
between the command and tab keys.) For example "s<Tab><Tab>" shows all the
keywords starting with "s."
Installer# s
save-running
Save the running configuration
set
Set property values of the running configuration
Installer# s
5.2.5
Using Command History
The CLI maintains a history of commands that have been entered. You can scroll
back through the history of commands by pressing the up arrow key. Any
command displayed in the history list can be executed again, or first modified and
then executed.
5.2.6
Command Line Processing
Commands are case sensitive. You can abbreviate commands and parameters as
long as they contain enough letters to differentiate them from any other currently
available commands or parameters. You can use the Tab key to complete partial
58
authentication algorithm
bridge ip mask
bridge ip
data encryption option
default gateway
default key
DHCP client
wireless RF distance
wep key string #1
wep key string #2
wep key string #3
wep key string #4
link rate
management VLAN
modulation type
RTS threshold
SNMP read-only community
status of station
TxPower Level
essid
Operation
Advertisement
Table of Contents
