Table of Contents
Advertisement
4.2
Management Settings
The SU-A-EZ's basic client settings are described in this section.
Current Password – The password used to access the web interface. The default
name is "private" (Length: 1-32 characters, case sensitive).
Management access to the web interface on the SU-A-EZ is controlled through a
single user name and password. To protect access to the management interface,
you need to configure an Administrator password as soon as possible. If the
password is not configured, then anyone having access to the SU-A-EZ may be
able to compromise the SU-A-EZ and network security.
New Password – The new password for management access. (Length: 1-32
characters, case sensitive)
Confirm New Password – Enter the password again for verification.
DHCP Client – With DHCP Client enabled, the IP address, subnet mask and
default gateway can be dynamically assigned to the SU-A-EZ by the network
DHCP server. (Default: Disabled). If no DHCP server is found when the unit boots
up or the lease of DHCP assignation expires, then the unit will use the configured
IP address, subnet mask and default gateway until it can find a proper DHCP
server and obtain a valid IP; DHCP server search operation will not stop until the
feature is disabled.
Station IP Address – The IP address of the SU-A-EZ. Valid IP addresses consist of
four decimal numbers, 0 to 255, separated by periods. If the SU-A-EZ's default IP
address is not compatible with the network you want to connect to, enter an
appropriate IP address and subnet mask as provided by the network operator.
Configuring the SU-A-EZ with an IP address expands your ability to manage the
SU-A-EZ. A number of SU-A-EZ features depend on IP addressing to operate.
SU-A-EZ Manual
Management Settings
43
Advertisement
Table of Contents
