Table of Contents
Advertisement
5.4.3
dynamicfreq
This command allows you to add one or more individual frequencies and a range
of frequencies, allowed by the chosen regulatory domain.
Syntax
dynamicfreq <f1,f2,f3-f4>
• f1,f2,f3-f4 - Specify the individual frequencies and/or frequency ranges that you wish
to add to the already configured scanning frequency list, in MHz, separated by comas
and no spaces. For a frequency range separate the beginning and ending frequencies
with a "-", i.e. for the frequencies 5.26GHz, 5.54GHz, and the range 5.7~5.785 type
'5260,5540,5700-5785', where the final three digits represent the space after the
decimal point.
Default Setting
None
Command Mode
Installer, Admin
Example
In this example the frequencies 5.260GHz, 5.540GHz, and 5.700GHz to 5.785GHz
are added within the band allowed by the chosen regulatory domain FCC. The
getfreq command is then used to display all selected frequencies.
Installer# dynamicfreq 5260,5540,5700-5785
...
Installer# getfreq
...
5260,5540,5700,5745,5765,5785
Installer#
SU-A-EZ Manual
Regulatory Domain Commands
65
Advertisement
Table of Contents
