Ethernet cable
SU-A-EZ
to
Insert the power cable plug directly into the standard AC receptacle on the
3
power injector.
Plug the other end of the power cable into a grounded, 3-pin socket, AC power
4
source.
NOTE
For International use, you may need to change the AC line cord. You must use a line cord set that
has been approved for the receptacle type in your country.
Check the Power LED on top of the power injector IDU to be sure that power is
5
being supplied to it.
SU-A-EZ Manual
RADIO
RESET
E T
E R N
E T H
Connecting the Power Injector IDU Cables
AC power
Ethernet cable
from LAN switch
27