Table of Contents
Advertisement
60026505 • 1 • 09/2020 • en
Pneumatics – quick-release locks
NOTE
Ø Clean the machine and prepare properly before parking it for an extended
period; see chapter Care and Maintenance.
7.3 Folding
WARNING
Serious crushing due to lowering / dropping machine parts
Ø No persons may stay under raised machine parts.
Ø Order persons to leave the danger zone around the machine. Make sure be-
fore folding that no persons are present in the danger zone.
Ø Comply with the accident prevention instructions.
WARNING
Risk of accident due to insufficient stability
Ø The machine must not be in an inclined position when folding it.
Ø Fold the machine only on a level and firm surface.
CAUTION
Damages to the machine
Ø Before folding in clean the area around the folding joints and the associated
hydraulic cylinders.
Ø Unfold the machine completely.
1. Lift the machine until the lower edge of the implements and coulter are at
least 40 cm above the ground.
2. Fold in the machine completely.
Operation | 7
39
Advertisement
Table of Contents
