horsch SW 600 Owner's Manual
  1. Manuals
  2. Brands
  3. horsch Manuals
  4. Farm Equipment
  5. SW 600
  6. Owner's manual
horsch SW 600 Owner's Manual

horsch SW 600 Owner's Manual

Seed wagon
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Seed Wagon
SW 600
Owner's Manual
Issued February 2017
Serial Numbers:
SW600 SN 230060017001 – Current

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SW 600 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for horsch SW 600

Summary of Contents for horsch SW 600

  • Page 1 Seed Wagon SW 600 Owner’s Manual Issued February 2017 Serial Numbers: SW600 SN 230060017001 – Current...
  • Page 2 SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 3 SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 4: Table Of Contents

    Machine Registration (Important Notice to Dealer/Owner!) ..............8 Warranty Guidelines ..........................9 Machine Registration Form: Customer’s Copy ..................11 Machine Registration Form: Dealer’s Copy...................13 Machine Registration Form: HORSCH’s Copy ..................15 Delivery Form: DEALERS’s Copy ......................17 Product Specification ..........................19 In These Operating Instructions ......................20 Authorized Operators ...........................20...
  • Page 5 Grease ............................. 70 Trailed Track System ........................... 71 General Information .......................... 71 Track System Components ......................72 Frame ............................72 Axles ............................. 72 Idlers and Mid-rollers ........................72 Tensioning system ........................72 www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 6 Bolt Tightening Torques – Metric Bolts ....................86 Bolt Tightening Torques – Imperial/Standard Bolts ................87 Metric Conversions Table ........................88 Machine Storage ..........................89 Maintenance ............................90 Hitch Adjustment & Maintenance ......................91 Maintenance Schedule ........................93 Troubleshooting ............................94 Pneumatic Systems ..........................94 www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 7 Seed Transfer ........................... 94 Metering System ..........................95 Faults & Remedies ..........................96 Support ..............................97 Notes: ..............................98 Index ..............................99 www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 8: Introduction - Safety & Guidelines

    Right hand and left hand are determined by facing the direction of forward travel respectively. HORSCH reserves the right to alter illustrations as well as technical data and weights contained in this manual at any time without notice.

  • Page 9: Warranty Guidelines

    Warranty Guidelines 1. The period of warranty for material defects relating to HORSCH products will be 12 months. In the case of written deviations from the statutory provisions, these agreements shall apply. They shall become effective upon delivery of the machine to the end customer, unless the unit is stored during seasonal months, whereas the machine is not utilized.
  • Page 10 SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 11: Machine Registration Form: Customer's Copy

    I hereby confirm receipt of the Owner’s Manual and Parts Catalog for the above mentioned machine. I have been instructed and informed by a HORSCH factory trained Service Technician / authorized Dealer representative in the operation and functions of the machine, as well as in the safety requirements.
  • Page 12 SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 13: Machine Registration Form: Dealer's Copy

    I hereby confirm receipt of the Owner’s Manual and Parts Catalog for the above mentioned machine. I have been instructed and informed by a HORSCH factory trained Service Technician / authorized Dealer representative in the operation and functions of the machine, as well as in the safety requirements.
  • Page 14 SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 15: Machine Registration Form: Horsch's Copy

    I hereby confirm receipt of the Owner’s Manual and Parts Catalog for the above mentioned machine. I have been instructed and informed by a HORSCH factory trained Service Technician / authorized Dealer representative in the operation and functions of the machine, as well as in the safety requirements.
  • Page 16 SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 17: Delivery Form: Dealers's Copy

    To the best of my knowledge, this machine has been delivered ready for field use and the customer has been fully informed as to proper operation and care. Signed: ................. (Customer) Signed: ................. (Dealer Representative) Date: ..................www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 18 SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 19: Product Specification

    Model number of the machine, can be found on the Serial Number Tag. HORSCH, LLC has placed a Serial Number Tag (reference picture below) on the machine with the above mentioned information. It is located on the main frame cross member tube directly behind the front hitch, just off center towards the left hand side of each machine.

  • Page 20: In These Operating Instructions

    For operation and maintenance of this machine, you will need: • Snug fitting clothing; no loose articles or strings. • Safety gloves and goggles to protect against dirt and sharp edged machine parts. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 21: Information Regarding Safety

    Information Regarding Safety The following warnings and safety instructions apply to all sections in these operating instructions. All users must follow recommended precautions and safe operating practices. Recognize Safety Information Understand Safety Symbols www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 22: Safety Symbols On The Machine

    No passengers are allowed to ride on the machine! Do not climb on rotatable parts. Use mounting steps provided for this purpose! Lifting hook; attach lifting tackle (chains, ropes, etc.) here when performing loading work! www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 23 Slow down when turning or traveling over rough ground, and when turning on inclines. Shut off tractor and shift in to ‘Park’ or set brakes when leaving tractor. Remove key when leaving tractor unattended. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 24 Wear Protective Clothing Wear close fitting clothing and safety equipment appropriate to the job. Operating equipment safely requires the full attention of the operator. Do not wear radio or music headphones while operating machine. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 25 A safety chain of the proper strength rating is provided with the machine as standard equipment. Using the appropriate adapter parts, attach the chain to the tractor drawbar support or other specified anchor location. Provide only enough slack in the chain to permit turning. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 26 SMV (Slow Moving Vehicle) sign clean and visible. Passengers on the machine are strictly forbidden. Danger Zone Only enter the Danger Zone when the lifting cylinder depth stops/safety stops are inserted. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 27 Properly dispose of pesticide containers, unused pesticides and left over treated seed and fertilizer. Read and observe manufacturers recommendations. Store pesticides in original containers with clearly visible and intact labels. Store in a separate, plainly marked locked building. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 28 Riders are subject to injury, such as being struck by foreign objects and being thrown off the machine. Riders also obstruct the operator’s view, resulting in the machine being operated in an unsafe manner. Passengers on the machine are strictly forbidden. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 29 Use headlight, flashing warning lights, and turn signals day and night. Follow local regulations for equipment lighting and marking. Keep lighting and marking visible and in good working order. Replace or repair lighting and marking that has been damaged or lost. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 30 The tractor must be heavy and powerful enough with adequate braking power for the towed load. Use additional caution when towing loads under adverse surface conditions, when turning, and on inclines. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 31 High voltage electricity from a welder can be conducted through the drawbar and damage electronic devices on attached machines. To protect controllers, disconnect equipment from drawbars and hitches before welding. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 32 If machine is connected to the tractor, engage parking brake and/or place transmission in ‘Park’ position, shut off engine and remove key. If machine is detached from the tractor, block wheels and use safety stands to prevent movement. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 33: Use For The Intended Purpose

    Installation or use of non-HORSCH products may have a detrimental effect on specific design features of the machine and affect the safety of machine operators and the machine itself. HORSCH will accept no liability for damage resulting from improper use. The risk will be borne solely by the operator.
  • Page 34 Liability for Consequential Damage The machine has been manufactured by HORSCH with great care. Nevertheless, even when used for the intended purpose, deviations in the application rate, including total failure, may occur as a result of, e.g.…: • Different composition of the seed (e.g., grain size distribution, density, geometrical shape, dressing, sealing).

  • Page 35: Road Traffic Safety

    Always lower the front jack when you park the seed wagon and raise the jack and put it in to the designated transport location when the seeder and wagon are in transportation position. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 36: Hydraulic System

    (children, passengers). The male and female quick couplers for the hydraulic connections between the tractor and the machine should be color-coded in order to avoid incorrect use. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 37: Hydraulic Function Precautions

    Always depressurize the pressure accumulator before starting work on the hydraulic system. The pressure gauge should not indicate any pressure. The pressure gauge reading should drop to 0 psi. Only then may service be carried out on the hydraulic system. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 38 Only use the footboards when filling the machine and carrying out maintenance work. Do not stand on the machine when it is in operation! The prescribed protective equipment that was supplied with the machine is not to be removed. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 39: Electrical System

    Electrical System Protect monitor and control system from high voltage. WARNING! HIGH VOLTAGE www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 40: Extracting Stuck Machine Safety & Guidelines

    Prior to working on the electrical system, disconnect it from the electric power supply. Be sure to retighten screwed connections which had been loosened during servicing and maintenance work. Further information is noted in this manual here Service & Maintenance and here Maintenance. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 41 Protective Equipment For operation and maintenance, you will need the following: • Strong protective gloves. • Goggles and/or Face Shield. • Proper protective clothing/attire (apron). • Face mask/respirator/breathing apparatus. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 42: Transport & Installation

    • Check air pressure in tires! • Check all hydraulic connections and hoses for correct fastening and function. • Immediately rectify any occurring damage or have it corrected by an authorized dealer! www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 43: Connecting The Iso Bus System

    Operation and function of the hydraulics on the attached seeder vary. Refer to the operating instructions for each seeder. Hydraulic Functions When handling the machine, ensure that nobody is in the danger zone. The hydraulic functions are controlled by the operator while in the tractor. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 44: Connecting The Road Lighting Equipment

    Connecting the Road Lighting Equipment Depending on configuration of the seeder, for tow behind, the system would connect to the air seeder. For tow between, the system would connect to the tractor. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 45: Technical Data

    0-1,400 lbs. Hydraulic Fan: …………………………….. 5000 rpm Hitching: ............ Drawbar CAT IV / CAT V (Optional), Ball Coupling Power requirements: ......... from 400+ HP Hydraulic requirements: …………………... Suggested 2800-3000 PSI, 25+ GPM www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 46: Configuration

    8. Road Lighting 13. Lower Platform Catwalk & Rail System 9. Rear Hitch Tow Between / Torpedo Hitch Tow Behind 14. Front Lift Jack Tank Lid Assembly 10. Track System / Dual Tire Option www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 47: Undercarriage & Track System Specifications

    Total Bogie/Track Bogie Diameter 16” Approx. Weight 9,000 lbs. (4090 kg) Pressure Required 1500 PSI Ground Pressure 12 PSI *For further information on the track system see Trailed Track System in this manual. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 48: Description - Sw (Seed Wagon)

    Description – SW (Seed Wagon) The HORSCH SW (Seed Wagon) has been specially design for use with other HORSCH equipment and seeders. The wagon can be hitched up either in the front of the seeder directly to the tractor or behind the seeder.

  • Page 49: Seed Wagon Tank Lid Adjustment

    NOT THE HANDLE, DO NOT OPEN! CAUTION – EXTREME PRESSURE! The planter talc should blow out and indicate a leak or you should be able to hear the air pressure escape as you lift the lid edge. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 50: Pneumatic System

    This can damage seed and may cause blockage in the metering unit. NOTE: On a Double Shoot air system, both fans must be running at all times. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 51: Hydraulic Fan(S)

    Technical Data: Motor Displacement: …………………1.16 Cubic inch/rev Operating Pressure: ………………… 2000 PSI Oil Flow Rate: …………………………approx. 15.4 GPM @ 3000 RMP, 25.6 GPM @ 5000 RPM Fan Speed: ……………………………3000-5000 RPM www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 52: Mode Of Operation

    To do so, the fan guard must be removed. (See picture below) The tapered bushing (1) fixes the impeller (2) in position and simultaneously tightens itself on the drive shaft (3). www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 53: Adjustment Of Fan Sensor

    Make sure that the sensor does not come in contact with the bolts or damage will occur that will cause the sensor to send false readings and eventually fail. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 54: Air System

    All the connectors of the air system MUST be air tight! Any leaks will affect the metering, resulting in incorrectly filled metering unit cells, blocked tubes and inaccurate seed distribution. Metering Unit Electric drive motor Hinged Flap Seed Channel, Venturi Metering Unit with Venturi www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 55: Metering Unit W/ Electric Motor

    1. Low Rate Sunflower & Corn 2. High Rate Sunflower & Corn 3. Low Rate Small Grains & Fertilizer 4. High Rate Small Grains & Fertilizer 5. High Rate Stainless Small Grains & Fertilizer www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 56: Meter Roller Alignment

    C-clip (Part # 00170053 – shown in picture below) in the bearing holder to assure that the meter stays centered. If the meter roller is not centered correctly, transfer correct thickness washer from one side to the other as needed. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 57: Roller Seed Rate Chart

    Yellow, High Rate Small Grains and Fertilizer Peas Rotor Black, Low rate small grains and fertilizer Blue, High rate sunflower and corn Red, Low rate sunflower & corn Meter Roller, Canola Meter Roller, Canola www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 58 Yellow, High Rate Small Grains and Fertilizer Peas Rotor Black, Low rate small grains and fertilizer Blue, High rate sunflower and corn Red, Low rate sunflower & corn Meter Roller, Canola Meter Roller, Canola www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 59 Yellow, High Rate Small Grains and Fertilizer Peas Rotor Black, Low rate small grains and fertilizer Blue, High rate sunflower and corn Red, Low rate sunflower & corn Meter Roller, Canola Meter Roller, Canola www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 60: Roller Replacement

    1. The sealing strip must not be torn or damaged. Replace if necessary. 2. Mount the side cover and sealing strip on the metering unit housing. 3. The rubber sealing strip must sit closely against the roller. Readjust the seal if necessary. Seal www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 61: Roller Replacement With Full Tank

    The rollers can be mounted with one or two fluted discs. If a roller is fitted with two fluted discs this doubles the discharge rate. See Tables on next page. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 62: Assembly Instructions

    Bearings are incorporated in the spacers. Depending on the manufacturing tolerance, shim washers are inserted to prevent friction between the fluted discs and the spacers. See picture below for reference. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 63: Functional Test

    2. If gap is on top and bottom of meter housing, turn the nuts so they move up on the stiffening rods until the meter roller is removed and installed with very little effort. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 64: Canola Brushes

    5. Replace the hinged flap on the venturi. Check for tightness. 6. The canola brushes should be removed when sowing normal-sized seeds. The screws must be reinserted in the drilled holes in the housing. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 65 2. Using a razor blade or utility knife you can slot the holes of the rubber strip so it can be lowered away from the metering roller, allowing for larger seeds to easily pass by with little effort and reduce drag on the drive motor. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 66 7-9 amps. Erratic and uneven seed distribution may occur if motors do not run smoothly and at a steady RPM. Checking the motor revolutions when seeding is the best way to determine constant RPM’s. Meter shown with electric drive motor www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 67: Iso Bus System

    ISO Bus System The HORSCH drill manager is an electronic control unit for seeders and their components. It regulates, monitors, and controls all connected modules. The applicable accident prevention regulations and the other generally accepted rules in respect of safety and occupational medicine are to be complied with.

  • Page 68: Scale System

    NOTE: For more detailed information on installation and operation of the Scale System see the specific Digi-Star Scale Link Operator’s Manual provided with the option. Scale – Mounted on machine Digital Monitor – Mounted in Tractor (Optional) www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 69: Service & Maintenance

    Perform each lubrication and service procedure illustrated in this section at the beginning of each season. Clean grease fittings before using grease gun. Replace any lost or broken fittings immediately. If a new fitting fails to take grease, remove and check for failure of adjoining parts. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 70: Grease

    HD WATER RESISTANT GREASE • GREASE GUARD Other greases may be used if they meet the following: • NLGI Performance Classification GC-LB NOTE: Some types of grease thickeners are not compatible with others. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 71: Trailed Track System

    *For more specific instructions of operation, installation and general guidelines for the track system, see the Camoplast Operation and Maintenance Manual equipped with the machine. For a replacement manual contact your nearest dealer, or visit https://camso.co/en/products-solutions/agriculture. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 72: Track System Components

    The rubber tracks are manufactured with high quality rubber and high strength steel cabling inside for superior durability and reliability. The tread layout ensures good flotation, excellent life, and self- cleaning characteristics. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 73: Specifications, Dimensions & Weight Limitation

    If additional distances are required, a 30 minute cool down period is recommended before transport is resumed. Absolute speed and duration levels may vary, depending on system type and ambient conditions. Limitations as listed, help avoid system heat buildup that could cause reduction in track life. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 74: Turning Radius Limitations

    (4100Kg)), wear safety equipment and observe the safety rules. If using a fork lift use for handling operations, be careful not to damage the rubber track. Metal chains or cables are not recommended! www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 75: Track System Installation

    Should a motorized lifting device be used, assistance on ground during operation of handling, coupling and assembly is needed. Do not stand between lifting device and axle assembly when mounting axles to implement. Be careful: risk of injury. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 76 620 N-m +/- 124 N-m (457 ft-lbs +/- 91 ft-lbs). 12. Repeat steps 7 through 11 for the other side of the axle assembly. 13. Remove any jack stands or supports and lower the implement to the ground. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 77: Track Maintenance

    Make sure that mobile parts with safe fixed positioning are locked and the tools used for maintenance are suitable for the type of service. HORSCH, nor Camso/Camoplast, is not responsible for direct or indirect damages occurred to people or things due to tampering, removal or modification of the safety devices, or caused by modifications of the machine without any previous authorization.

  • Page 78: Track Lubrication Table

    Identifying and resolving issues early is key to improving track system life and decreasing operating expenses. See “Track System Inspection” in the Routine maintenance section for more information. Check rubber track alignment daily by inspecting the guide lugs. If excessive wear or chunking www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 79: Weekly Maintenance, Or Every 50 Working Hours

    2. Verify wheel bolt torque (always torque after wheel removal regardless of hrs.). Wheel bolt size Torque (N-m) Torque (ft-lb) 320 +/- 64 236 +/- 47 620 +/- 124 457 +/- 124 www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 80: Annual Maintenance, Or Every 500 Working Hours

    2. Once installed, measure the inside distance front and rear on the mainframes as noted below. Undercarriages must be parallel to within 6mm (0.25 in.) toe in. A suitable location for measurement is noted by arrows below the turnbuckle eyes, noted in the diagram below. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 81 7. If the shim fits freely between the lugs and mid-roller on both sides of the undercarriage the alignment is correct. It the shim binds and does not fit between the mid-rollers/guide lugs track adjustment is necessary. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 82: Track Alignment Procedure

    5. When alignment is complete reinstall the lock plates and tighten cap screws to their required torque specification of 130 N-m (95 lb-ft). www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 83: Track System Inspection

    Adjusting Track Tension Tension is pre-set at the factory and requires no adjustment during operation. Provision is made to detension the track system allowing for removal of the rubber track. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 84: Track Removal

    The screw should be retracted until there is no preload on the spring. Thread the screw in to the onset of compression and back off ½ turn. 5. Install tensioning screw rotation lock and torque retainer bolts to 122 N-m (90 lb-ft). www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 85: Troubleshooting Track System

    System dog tracking or Alignment adjustment incorrect. Adjust alignment per problems with track Undercarriages parallelism is out procedures. Otherwise, alignment of tolerance contact your Dealer www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 86: Bolt Tightening Torques - Metric Bolts

    2150 4.00 1676 1257 1885 1415 2700 2025 3155 2365 3.00 1075 1775 1330 2100 1650 3000 2350 3500 2750 NOTE: Items with (*) indicate torque in Inch/Pounds. All others in Foot/Pounds. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 87: Bolt Tightening Torques - Imperial/Standard Bolts

    Do not use these values if a different torque value or tightening procedure is given for a specific application. Torque values listed are for general use only. Check tightness of fasteners periodically. Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 88: Metric Conversions Table

    Tighten toothed and serrated-type lock nuts to the full torque value. Metric Conversions Table Convert from Standard to Metric – multiply by the following factors: www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 89: Machine Storage

    Loosen the tank lid sealing bolts to reduce pressure and not damage the seals when not in operation and before long term storage. • Review the Owner’s operator manual for the machine and each optional equipment in its entirety, giving special attention to all safety guidelines. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 90: Maintenance

    Monitor power not directly connected to battery. • Radio power not directly connected to battery. • Monitor wiring too close to controller with standard system cables. Check causes of EMI and take corrective measures to overcome the problem(s). www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 91: Hitch Adjustment & Maintenance

    It is mandatory to carry out and regularly check the adjustment of the hold-down of the ball head coupling prior to each use. Adjust hold-down assembly to 0.5mm (0.020”) Use a sheet of standard white paper or a feeder gauge. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 92 TIGHT! THERE SHOULD ALWAYS BE A PRECISE SPACING OF 0.5MM (0.020”) BETWEEN THE HOLD-DOWN AND THE TRAILER HITCH BALL COUPLING. Maintenance: Foam Ring Lubrication Keep foam ring intact as a dust filter. Apply grease to ball and trailer hitch regularly. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 93: Maintenance Schedule

    Carry out cleaning and maintenance Entire Machine Park the machine undercover if possible After 3-5 years Ins tructions Interval Hydraulic Hoses Replace hoses on lifting hydraulics NOTE: If Tension Bushings are worn, replace immediately! www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 94: Troubleshooting

    Troubleshooting Pneumatic Systems Seed Transfer www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 95: Metering System

    Metering System www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 96: Faults & Remedies

    For issues with any electronic control system relating to the seed wagon scale or seed flow or other monitoring devices, see the product specific manual included for that option. www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 97: Support

    HORSCH wants you to be completely satisfied with us and your new machine. If there should be any problems or concerns, please contact your nearest authorized HORSCH dealer. Our dealers will be pleased to assist you in any way they can and solve any problems which may occur and provide you with the support you need.

  • Page 98: Notes

    Notes: www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...

  • Page 99: Index

    Fan Sensor ............53 Tensioning system......... 72 Track Alignment ..........80 Track Maintenance Schedule ......78 Hitching ............45 venturi ............54 Idlers ..............72 Weekly Maintenance ........79 Liability ............34 Welding ............96 Go to Top www.horsch.com SW600 Owner’s Manual – Version 1.2 07/2018...
  • Page 100 PN 05950966 Ver. 1.2 07/2018 HORSCH, LLC 200 Knutson St. Mapleton, ND 58059 USA (T) 701-532-1000 (F) 701-532-1101 info.us@horsch.com...

Table of Contents