Table of Contents
Advertisement
B
The appliance is fitted with the controls for use
of its main functions.
A)Burner control knob: for lighting, turning
off and regulating the relative burner and pi-
The lighting and turning off procedure is as de-
scribed below for both burners.
Lighting
IT
1 - Turn on the gas supply tap.
2 - Press the knob and turn it anti-clockwise (pos.
AUS
a) while at the same time pressing the piezoe-
lectric ignition knob (A) repeatedly to light the
DE
pilot light. Keep the knob pressed for about 15
sec. to prime the thermocouple.
3 - Turn the knob anti-clockwise (pos. b) to light
FR
the burner.
N.B.: turn the knob gradually anti-clockwise to adjust the
ES
power of the flame down to the minimum setting.
Turning off
4 - Turn the knob clockwise (pos. c) to turn the
burner off.
N.B.: the pilot light will remain on to allow the burner to
be re-lit.
5 - Turn the knob clockwise (pos. d) to turn off the
pilot light.
6 - Turn off the knob to ensure safety.
DESCRIPTION OF CONTROLS
Off marker
A
SWITCHING THE BURNER ON AND OFF
Piezoelectric ignition
marker
Pilot light
marker
Full power marker
Minimum power
marker
lot light.
B)Water tap: for regulating the flow of water.
C)Piezoelectric ignition knob: for lighting the pilot
light.
a
d
- 6 -
C A
B
C
A
b
c
B
A
C
IDM-3960330050.tif
A
IDM-3960330130.tif
Advertisement
Table of Contents
