Table of Contents
Advertisement
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Open the door (A).
3 - Unscrew the nozzle (B) and replace it with the one
suitable for the type of gas in use (see table at
back of manual).
4 - Close the door (A).
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Open the door (A).
3 - Unscrew the union (B).
4 - Extract the nozzle (C) and replace it with the
one suitable for the type of gas in use (see
table at back of manual).
5 - Screw the union (B) back in place and close the
door (A).
IT
AUS
Important
DE
This operation must be carried out by
skilled operatives in compliance with the le-
gal requirements with regard to safety at
FR
work.
Never dump non-biodegradable materials,
ES
lubricating oils and non-metallic compo-
nents (rubber, PVC, resins, etc.) in the envi-
ronment. Dispose of them in accordance
with the relevant legal requirements.
REPLACEMENT OF THE BURNER NOZZLE
REPLACEMENT OF THE PILOT LIGHT INJECTOR
DECOMMISSIONING THE APPLIANCE
A
A
- 16 -
B
IDM-3960330080.tif
B
C
IDM-3960330090.tif
Advertisement
Table of Contents
