Interpreting the Data
Temperature Scale
A temperature scale is shown, which adjusts dynamically depending on the settings made
during configuration of the logger with LogTag
Markers
On the chart, special symbols will mark the readings at which certain events took place:
º
A
symbol will be shown, if the UTREL30-16 was downloaded with LogTag
l
Analyzer.
•
A
symbol will be shown if an inspection mark was placed with the
l
button.
•
A
symbol will be shown when the Paused feature was enabled, and any button was
l
pressed during recording.
A # symbol will be shown where a reading could not be taken due to USB
l
communication with a PC.
•
A
symbol will be shown when the min/max readings were reset.
l
USB Paused Readings
This logger cannot take a reading while exchanging data with a PC while being plugged
into a USB port. As a result, you will occasionally see a gap in the graph where the
UTREL30-16 would otherwise have taken a reading. The list shows --- instead of the
reading.
Recorded Data Chart
The chart shows a graphical representation of the data during the trip. As part of the
UTREL30-16 configuration process you set the parameters that influence how the chart is
presented.
Legend
Shows the symbols for
paused marks
and
File Information
This section shows general information about the PDF file, such as generation time, date
and time formats used in the chart and the data list as well as the file name, which is
compiled from information about the data it contains:
LogTag_[serial_number]_[trip number]_[file creation date]_file creation time]_[OK or ALM].pdf
Other files that may be generated have the extensions *.csv and *.ltd.
Logger Information and Configuration
This section shows general information such as serial number, model number, trip
number, battery status and description. It shows how the logger was started, if a start
download
marks,
paused marks
if they appear in the readings.
UTREL30-16 User Guide
®
Analyzer.
inspections
marks,
®
REVIEW
min/max reset
marks,
49
/MARK
USB
Need help?
Do you have a question about the UTREL30-16 and is the answer not in the manual?
Questions and answers