LogTag Recorders UTREL30-16 Product User Manual page 19

Preparing a UTREL30-16 for first use
Advanced Configuration Settings
Select Advanced Settings for additional configuration settings. These settings decide how
some of the elements are displayed on the unit's own display and set certain options
specific to the UTREL30-16.
Figure 2: UTREL30-16 advanced configuration screen in LogTag
These parameters influence what appears on the display:
Pausing alarm/statistics processing (see
l
Switching off the display after 30 seconds (Power save, see
l
Allowing a user to reset the trip's minimum and maximum values on the display
l
during recording
Following parameters influence specific behavior of the UTREL30-16:
Clearing and resetting alarms when the
l
Leaving the alarm turned on, even if readings return to the normal temperature
l
range again
Allowing the user to stop the logger with the
l
Allowing the user to reset the logger with the
l
Enabling the buzzer for the audible alarm
l
For detailed information about each parameter please read the section about Configuring a
®
LogTag for logging in LogTag
UTREL30-16 User Guide
(see Clearing the Min/Max Values on page 38)
®
Analyzer's User Guide or press F1 for help.
®
Analyzer 3
Paused Readings on
button is pressed
START
/CLEAR/STOP
START
/CLEAR/STOP
START
/CLEAR/STOP
page 36)
Power Save on page 37)
button
button
19