Push Button Start With Start Delay - LogTag Recorders UTREL30-16 Product User Manual

Starting the Logger
you keep holding the button for more than 2
l
seconds after
the backup battery is critically low and the
l
logger is not connected to power.

Push Button Start with Start Delay

If the logger has been configured for a push button
start with a start delay, the word
is shown instead of the
The delay time is shown in hours and minutes. The
time counts down and the UTREL30-16 starts
recording when it reaches 0:00.
The timer can be cancelled and the logger reset to
.
READY
While and
STARTING
hold the
START
/CLEAR/STOP
show. Release the button when
disappears.
and
STOPPED DELAY
will show, together with the current time, and the
logger can now be started again as normal.
The UTREL30-16 will not be reset if you
release the button before
l
or
keep holding the button until
l
disappears.
disappears; or
READY
STARTING DELAY
symbol.
are shown, press and
DELAY
button.
STOPPED
STARTING
will both disappear, and
STARTING
STOPPED
UTREL30-16 User Guide
will now
READY
disappears;
30