LogTag Recorders UTREL30-16 Product User Manual page 15

Preparing a UTREL30-16 for first use
Standard Configuration Settings
The standard configuration is similar to those of other LogTag
includes settings such as
and duration, start delay, and password.
Adjust the settings as required. For detailed information about each parameter please read
the section about Configuring a LogTag
or press F1 for help.
UTREL30-16 Start Options
During configuration with LogTag
taking temperature readings:
Push button start
The logger will start taking temperature readings as soon as you have pressed the
button (see
START
/CLEAR/STOP
When you choose the push button start option, you can
disable it) and also Begin recording after a
Pre-start readings
If you enable pre-start readings, the UTREL30-16 starts recording as soon as it is
unplugged from the USB port
button. No alarms are processed while pre-start readings are being taken, pre-start
readings will not appear in the PDF file after the logger was started, and no PDF file will be
generated if only pre-start readings are present in the logger. Using pre-start readings is a
2
The first pre-start reading is taken one log interval after you unplug the unit from the USB port.
UTREL30-16 User Guide
User ID, start method,
®
for logging in LogTag
®
Analyzer you can decide when the UTREL30-16 starts
Starting the Logger on
delay.
2
and will continue to do so until you start the unit via the
®
logger products and
pre-start recording,
®
Analyzer's User Guide
page 29).
Enable pre-start logging
15
logging interval
(or