Preparing A Utrel30-16 For First Use; In The Office; On-Site - LogTag Recorders UTREL30-16 Product User Manual

Preparing a UTREL30-16 for first use

Preparing a UTREL30-16 for first use
Before your UTREL30-16 can record temperature data you need to perform a few setup
steps.

In the office

These steps are completed in your office, using a PC connected to the internet:
1. Install the batteries
2. Download and install the latest version of LogTag
the LogTag Recorders Software Download
3. Configure the unit using LogTag

On-site

Once you have completed this process, you can take the logger to the location where it
will be installed:
1. Connect external power
2. Connect a sensor
3. Start the logger.
UTREL30-16 User Guide
into the unit.
®
Analyzer software.
if you use the UTREL30-16 in a stationery application.
and place the unit, preferably using a wall mount bracket.
®
Analyzer 3. You can do this from
page.
11