LogTag Recorders UTREL30-16 Product User Manual page 22

Display Overview
battery needs to be changed by a qualified technician.
Main Battery Condition
A battery test is performed periodically. Depending on the condition of the battery, all, some or
none of the 4 bars will show. See
ALARM/OK indicator
The symbol is shown as soon as the UTREL30-16 has registered an alarm event. While there are
no alarms, or if a previous alarm has been cleared, the
Recording indicators
The recording indicators show what the UTREL30-16 is currently recording.
If is shown, the UTREL30-16 is ready to be started with the
READY
l
Depending on the configuration it may already record pre-start readings.
If is shown, the logger has been started, and a start delay is active. The word
STARTING
l
is also shown, together with the time in hours and minutes until the start.
DELAY
If is shown, the UTREL30-16 is recording temperature at the sample interval defined
l
during configuration.
If is shown together with the word
l
recorded values are not taken into account when calculating alarm events and durations.
If the word
STOPPED
l
Time Value and Time Indicators
The time value display is used to show one of the following:
The current time
l
The time remaining until the logger starts recording (for a delayed start)
l
A duration, for example of an alarm
l
The time indicators identify which of those is displayed as follows:
If is shown, the time value represents the current time in hours and minutes (24- hour
TIME
l
format).
If is shown, the time value represents a start delay, or the time remaining until a
DELAY
l
date/time start will occur.
If is shown, the time value represents the duration, for example the time above
DURATION
l
the upper alarm limit.
The word boot appears in place of the clock if new firmware is being uploaded to the UTREL30-16.
The word dtstappears in place of a time value if the logger is configured for a date/time start, and
the start time has not yet passed.
Reading Type
The word is shown when the temperature on the display represents the last recorded
CURRENT
temperature.
The word is shown in Review mode, when the temperature on the display represents the
MAX
maximum recorded temperature for the day displayed.
UTREL30-16 User Guide
Powering the UTREL30-16 on page 24
PAUSED
is shown, the UTREL30-16 has finished recording temperature data.
for details.
symbol is shown.
START
, the product is also recording, but the
22
button.
/CLEAR/STOP