Configuring The Utrel30-16 For Logging - LogTag Recorders UTREL30-16 Product User Manual

Preparing a UTREL30-16 for first use UTREL30-16 User Guide 13

Configuring the UTREL30-16 for logging

Before a UTREL30-16 logger can be deployed, it must be configured with the parameters
required for starting and recording temperature values.
Loggers can be purchased unconfigured, or pre-configured, ready to be started, using one
of a number of different profiles that are available.
You can check if your logger is already configured or not by briefly pressing the
button.
REVIEW
/MARK
The logger is already configured to start
If your logger is configured to start it will show either
if the logger was pre-configured for a push-button start, or
if the logger was pre-configured for a Date/Time start.
If your logger shows one of these screens you may skip the configuration process.