Plugging The Utrel30-16 Into A Usb Port - LogTag Recorders UTREL30-16 Product User Manual

Plugging the UTREL30-16 into a USB port

The last recorded temperature is now no longer
shown, but minimum and maximum trip values
remain.
The logger will not stop if you
release the button before the
l
disappears; or
keep holding the button after
l
remains permanently on until the
reappears.
Once the logger has stopped, the last alarm status before the logger stopped will
continue to be indicated with a cross or a tick symbol on the display, but the
audible alarm and the alarm LED will turn off (see exception below).
If an ALARM is present ( ) and the
is enabled, you will need to clear the alarm first before you can stop the logger.
Please see Clearing an Alarm
shown for the alarm status once the logger has stopped.
Plugging the UTREL30-16 into a USB port
What happens when you plug your UTREL30-16 into a USB port depends on the operating
system of the computer, the settings made during configuration and whether or not
®
LogTag Analyzer is running.
Microsoft Windows
Several drivers will now be installed, depending on the UTREL30-16's configuration.
All drivers are part of the operating system and will typically not require administrator
privileges for your computer. During driver installation you will see the familiar Windows
notification.
UTREL30-16 User Guide
symbol
STOPPED
symbol
Clear alarm by pressing STOP button
for more information. In this case, a tick will be
45
function