LogTag Recorders UTREL30-16 Product User Manual page 46

Plugging the UTREL30-16 into a USB port
Drivers that are installed may include the following:
Mass Storage Device Driver
l
LogTag Mass Storage USB Device Driver
l
These two devices are required so you can access the data files in the same way as a
USB memory stick. These drivers will not be installed if the UTREL30-16 does not
generate files.
USB Input Device (HID) Driver
l
This device is used for communication to LogTag
be installed, even if LogTag
USB Composite Device Driver
l
This driver signals that multiple devices are involved when plugging in a
UTREL30-16.
If you have configured the UTREL30-16 to
you plug the logger into the USB port. While the file creation takes place, the display
shows bUSy instead of the current time.
Once the files are generated, a new drive or mounted device will appear. The device name
will be created from the serial number of the UTREL30-16.
If you have disabled file generation during configuration, no drive will appear.
USB communication can interfere with temperature measurement. While a
UTREL30-16 is plugged into a PC's USB port, occasionally a scheduled temperature
reading is not taken. The graph will display a gap and the data list will show ---
followed by the # symbol. This does not apply when the logger is connected to a
USB power supply.
macOS, OSX and Linux
Typically in these operating systems a new drive will be mounted, from which you can
open the PDF file. You will not be able to configure the UTREL30-16 using either of these
operating systems, unless you use virtualization software such as VMWare Fusion,
Parallels Desktop or Virtualbox to create a hosted Windows environment. You need to
discuss these options with your network administrator. Virtualbox is free, while VMWare
and Parallels are offered as paid subscriptions.
UTREL30-16 User Guide
®
Analyzer is not present on the computer.
generate
®
Analyzer and its driver will always
files, these will be created every time
46