Table of Contents
Advertisement
Cleaning and care
Periodic checks
To prolong the service life of the
dishwasher, maintenance should be
carried out at least once a year by the
Miele Customer Service Department.
Maintenance covers the following:
- Electrical safety according to national
regulations (e.g. VDE 0701/0702 in
Germany)
- Door mechanism and door seal
- Any screw connections and
connectors in the wash chamber
- Water inlet and drainage
- Internal and external dispensing
systems
- Spray arms
- Filter combination
- Sump including drain pump and non-
return valve
- All baskets and inserts
The following operational tests will be
carried out as part of the maintenance:
- A programme sequence will be run as
a test run
- Seals will be tested for water
tightness
- All relevant measuring systems will
be safety tested, including fault
displays
- Safety features
56
Check the condition of your
dishwasher regularly (approx. every
4 - 6 months). This way faults and
problems can be avoided.
All surfaces are susceptible to
scratching.
Contact with unsuitable cleaning
agents can alter or discolour the
external surfaces.
Cleaning the wash cabinet
The wash cabinet is largely self-
cleaning, provided that the correct
amount of detergent is always used.
If, despite this, limescale or grease
deposits accumulate in the cabinet,
these can be removed with a
proprietary dishwasher cleaner
(available from Miele). Follow the
dosage recommended by the
manufacturer on the packaging.
Clean the filters in the wash cabinet
regularly.
Advertisement
Table of Contents
