Table of Contents
Related Manuals for Miele PG 8130 U
Summary of Contents for Miele PG 8130 U
- Page 1 Operating instructions Commercial dishwasher PG 8130 U / PG 8130i en - CA To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the M.-Nr. 10 777 610...
-
Page 2: Table Of Contents
Contents Notes about these instructions................ 5 Guide to the machine .................... 6 Machine overview....................6 Control panel ......................7 Display functions ..................... 8 Correct application .................... 9 Warning and Safety Instructions................ 11 Caring for the environment ................ 17 Energy-saving dishwashing................... 18 Commissioning.................... - Page 3 After sales service.................... 69 Contact in case of a fault ..................69 Program updates ....................69 Optional accessories .................. 70 Electrical connection .................. 71 Removing the toe kick................... 72 Plumbing ...................... 74 The Miele Waterproof system................74 Water intake ......................74...
- Page 4 Rinse aid........................ 81 External dispensing ....................81 Temperature unit....................82 High-temperature final rinse .................. 82 EcoStart......................... 83 Networking ......................85 Miele@home ......................85 2nd interim rinse....................89 Brightness ......................89 Memory ......................... 89 Refill indicators ...................... 89 Check filters ......................89 AutoOpen ......................
-
Page 5: Notes About These Instructions
Notes about these instructions Warnings Information which is important for safety is highlighted like this. This alerts you to the potential danger of injury to people or damage to property. Read these warning notes carefully and observe the procedural instructions and codes of practice they describe. -
Page 6: Guide To The Machine
Guide to the machine Machine overview a Upper spray arm (not visible) g Filter combination b Cutlery tray (depending on model) h Data plate c Upper basket i Rinse aid reservoir d Middle spray arm j Dual-compartment detergent dispenser e Air inlet for drying k Reservoir for reactivation salt f Lower spray arm... -
Page 7: Control Panel
Guide to the machine Control panel a Program selection f OK button b Display g button (FlexiTimer) with indicator light c Option buttons h Program selection button d Start button with indicator light i On/Off button e Arrow buttons... -
Page 8: Display Functions
Guide to the machine Settings menu Display functions General information The display is used to select or set the following: – The program – The FlexiTimer (Delay start) – The Settings menu The Settings menu is used to change different configurations within the The display can show the following: dishwasher. -
Page 9: Correct Application
Any other use, conversions and modifications are not permitted and could be dangerous. Miele cannot be held liable for damage resulting from incorrect or improper use or operation. This dishwasher is intended for stationary, indoor use only. - Page 10 It is not suitable for room lighting. Replacement bulbs may only be fitted by a Miele authorized person or by Miele Service.
-
Page 11: Warning And Safety Instructions
Technical safety This dishwasher must only be installed, commissioned, repaired and maintained by Miele Service, a dealer or a suitably qualified service technician. Installation, repairs and maintenance work by unqualified persons could be dangerous. Miele cannot be held liable for unauthorized work. - Page 12 Warning and Safety Instructions In the event of a damaged or leaking dishwasher, switch off the power supply immediately and call Miele Service, a Miele dealer or a suitably qualified service technician. Faulty components must only be replaced by genuine Miele original spare parts.
- Page 13 For safety reasons, such replacements may only be carried out by a qualified technician, a Miele dealer or the Miele Service. The dishwasher must be disconnected from the electrical supply before any maintenance or repair work is carried out.
- Page 14 Warning and Safety Instructions Correct use This dishwasher is designed for operation with water and cleaning agents suitable for use in dishwashers only. Organic solvents and flammable liquid agents must not be used. This could cause an explosion, damage rubber or plastic components in the dishwasher and cause liquids to leak out of it.
- Page 15 Seek medical help immediately if you have inhaled or swallowed any detergent. Miele cannot be held liable for any effect chemical detergents may have on the material of the items being cleaned. Observe the detergent manufacturer's instructions with regard to storage conditions, use and dosage.
- Page 16 Accessories Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, warranty, guarantee and/or product liability claims will be invalidated. Miele cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions.
-
Page 17: Caring For The Environment
Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed. -
Page 18: Energy-Saving Dishwashing
Caring for the environment Energy-saving dishwashing This dishwasher is exceptionally economical in its use of water and electricity. For best results follow these tips: – Make full use of the baskets without overloading the dishwasher. This results in the most economical dishwashing. -
Page 19: Commissioning
Commissioning Opening the door Closing the door Push the baskets in. At the end of programs with a drying phase (see “Program overview”), the Push the door until it clicks shut. door will slightly open automatically in order to help the drying process. ... -
Page 20: Basic Settings
Commissioning Time of day Basic settings The display will then change to the Turn the dishwasher on with the screen for setting the time. button. The current time of day must be set The welcome screen will appear when before you can use the “FlexiTimer”... - Page 21 Commissioning Water hardness Finally, the messages Miele@home enabled Set up complete will appear The display changes to the screen for in the display. setting the water hardness. After confirming these messages with – The dishwasher must be OK, the messages ...
-
Page 22: For Commissioning Purposes, You Will Need
Use only special, coarse-grained Suitable products are available from reactivation salt or other pure Miele Professional. evaporated salt. Other types of salt may contain Every dishwasher is tested at the insoluble components which can factory. There will be residual water in cause the water softener to the machine from this test. -
Page 23: Filling The Salt Reservoir
Commissioning Clean any excess salt from around Filling the salt reservoir the reservoir opening and then screw Important! Before filling the salt the cap on again firmly. reservoir with reactivation salt for the Run the Rinse & Hold program first time, you must fill it with approx. -
Page 24: Rinse Aid
The flap will spring open. Suitable products are available from Miele Professional. Alternatively, it is possible to use – household vinegar with a max. 5 % acid content – liquid citric acid with up to 10 % acid... -
Page 25: Rinse Aid Indicator
Commissioning Rinse aid indicator When the Refill rinse aid message appears in the display, the reservoir contains sufficient rinse aid for 2 – 3 programs only. Fill the reservoir with commercial rinse aid. Confirm with OK. The refill indicator will go out. If you do not want the salt and rinse aid indicators to appear, you can ... -
Page 26: Loading The Commercial Dishwasher
Loading the commercial dishwasher – Make sure that small items cannot Tips fall through the holders in the Remove coarse food residues from baskets. dishes. Small items such as lids should therefore be placed in the cutlery tray There is no need to pre-wash items or cutlery basket (depending on under running water. - Page 27 Loading the commercial dishwasher Items not suitable for dishwashers Aluminum components (e.g. – Wooden cutlery and dishes or items ventilation hood grease filters) must with wooden parts, as these may not be cleaned in the dishwasher discolour or fade. The glue used in with caustic alkaline commercial or these items is not dishwasher-proof.
-
Page 28: Loading Examples
Loading the commercial dishwasher Loading examples Loading for 10 standard place settings with cutlery basket Lower basket Upper basket Cutlery basket... - Page 29 Loading the commercial dishwasher Loading for 13 standard place settings with cutlery basket Lower basket Upper basket Cutlery basket...
-
Page 30: Flexassist
Loading the commercial dishwasher Cup rack FlexAssist Using the yellow lever , lift the cup The yellow coded FlexAssist parts rack upwards to make room for tall indicate which elements of the items. dishwasher baskets and cutlery tray are moveable. They also act as grips and Glasses can be arranged along the cup have symbols embossed on them to rack to give them some support during... - Page 31 Loading the commercial dishwasher Hinged spikes XXL cup rack (depending on model) The rows of spikes can be lowered to The cup rack can be set at two different make more room for larger items such widths so that it can also accommodate as casserole dishes.
- Page 32 Loading the commercial dishwasher Glassware rail Adjusting the height The glassware rail is designed to hold You can set the glassware rail at two tall glasses with long stems securely. different heights. Lower the glassware rail with the Pull the glassware rail upwards and yellow lever ...
-
Page 33: Adjusting The Upper Basket
Loading the commercial dishwasher Adjusting the upper basket Dishwasher with cutlery basket (see data plate for model number) In order to gain more space for taller items, the upper basket can be Plate in cm Upper adjusted on three levels with 2 cm (3/4") basket Upper basket Lower... -
Page 34: Lower Basket
Loading the commercial dishwasher Removable MultiComfort insert Lower basket The rear section of the lower basket is See “Loading the dishwasher, Loading used for washing cups, glasses, plates, examples” for examples of how to pots and pans. load dishes and cutlery. You can remove the MultiComfort insert ... - Page 35 Loading the commercial dishwasher FlexCare glass holder Glassware rail Silicone padding in the FlexCare glass The glassware rail is designed to hold holder provides a stable and secure tall glasses with long stems securely. hold for delicate stemware. Stem glassware, e.g. wine, champagne and beer glasses, can be leaned against the glass holder or suspended from it.
- Page 36 Loading the commercial dishwasher Hinged spikes Bottle holder The spikes at the front are used for The bottle holder can be used to wash washing plates, soup bowls, platters, narrow items, e.g. milk and baby dessert bowls and saucers. bottles. Both rows of spikes can be lowered to make more room for large items such as pots, pans and serving dishes.
-
Page 37: Cutlery
Loading the commercial dishwasher Cutlery Cutlery basket (depending on model) Fit the insert onto the cutlery basket if required. The cutlery basket can be placed anywhere on the front rows of spikes in the lower basket. To avoid the risk of injury, knives and forks should be placed with the handles upwards in the basket. -
Page 38: Operation
Miele Professional. For special soiling or if using liquid detergent dispensed by a liquid Cleaning tabs can be used. detergent pump, contact Miele for Only use tabs that are quick advice on how to adapt the detergent dissolving. Suitable tabs are dosage to the particular available from Miele Professional. - Page 39 Operation Replace the empty container with a Refilling or changing containers full one. The DOS module is equipped with a level indicator which shows the Refill Push the suction lance into the detergent message in the display when opening of the container and screw it the level drops below the minimum.
-
Page 40: Changing Detergent
Operation Changing detergent If you want to change the detergent used, the system must first be rinsed through with water to avoid a reaction between the different detergents. Remove the suction lance from the container and place it in a container of water. -
Page 41: Adding Detergent
Operation Do not inhale or ingest powder detergent. Do not swallow dishwasher detergents. Dishwasher detergents can cause burning in the nose, mouth and throat if swallowed. Seek medical attention immediately if detergent has been swallowed or inhaled. Keep children away from detergents. -
Page 42: Turning The Machine On
Operation Turning the machine on Selecting a program Make sure the spray arms are not Choose your program according to the obstructed. type of load and the degree of soiling. Close the door. The different programs and their uses are described in the Program overview ... -
Page 43: Time Display
Operation Time display Energy management The estimated duration of the program To save energy, the dishwasher will selected appears in hours and minutes switch off automatically 10 minutes in the display before the program after the last time a button has been begins. -
Page 44: Program End
Operation Program end Switching off The program has finished when At the end of a program: appears in the display and the door has The dishwasher can be switched off opened slightly (if applicable). at any time using the button. The drying fan may continue to run for Switching the dishwasher off during a a few minutes at the end of the... -
Page 45: Interrupting A Program
Operation Interrupting a program Changing a program A program will be interrupted as soon If the detergent dispenser flap has as the door is opened. already opened, do not change the If the door is closed again, the program program. will continue from the point it was at before the door was opened. -
Page 46: Program Options
Program options: Countdown indicator Options The Countdown indicator option is Options can be selected and selected as standard and displays the deselected using the appropriate time remaining until the end of the buttons and the display before starting program. the program. -
Page 47: Flexitimer With Ecostart
Program options: Turn on the dishwasher with the FlexiTimer with EcoStart button. With the FlexiTimer , you have three The Start indicator light flashes. options for starting the program using delay start. You can set the start time or ... - Page 48 Program options: Start at Finish at With the Start at function, you set the With the Finish at function, you set the exact time at which you want the latest time at which you wish the program to start. program to end. ...
- Page 49 Program options: EcoStart Changing or deleting set times EcoStart function you to take You can change the set times or start advantage of time variable economy the program before the start time in the rates of electricity. Before you can use display is reached.
-
Page 50: Program Guide
Program guide Program When to use Detergent The following dosages are based on Miele cleaning agents. Please follow manufacturer's instructions on dosage. Compartment I Compartment II For fresh, easily removed food residues. 20 – 25 g ProSpeed or 1 tab ... - Page 51 Program guide Program sequence Pre-wash Main wash Interim Interim Final rinse Drying Extra AutoOpen rinse I drying rinse II 70 °C 65 °C 30 s 10 s 15 min 10 s 65 °C 65 °C 10 min 3 min 30 min 1.5 min 75 °C 65 °C 8 min 10 min 3 min 30 min 1.5 min 50 °C 60 °C 10 min 1 min 5 min...
- Page 52 Program guide Program Consumption Duration Electrical energy Water Cold water Hot water Cold water Hot water 15 °C 55 °C 15 °C 55 °C 3.5 kW 4.2 kW 3.5 kW 4.2 kW 3.5 kW 4.2 kW 3.5 kW 4.2 kW 3.5 kW 4.2 kW ProSpeed 1.5 kWh 1.0 kW 0.9 kW 14.5 L 38 min 33 min 28 min 24 min ...
- Page 53 Program guide Program Consumption Duration Electrical energy Water Cold water Hot water Cold water Hot water 15 °C 55 °C 15 °C 55 °C ProSpeed 1.7 kWh 1.1 kWh 14.5 L 88 min 58 min Universal 1.7 kWh 1.0 kWh 15.2 L 99 min 72 min Pots & Pans 1.9 kWh 1.1 kWh 20.2 L 119 min 84 min...
-
Page 54: Cleaning And Care
To prolong the service life of the commercial dishwasher, it should Contact with unsuitable cleaning agents can alter or discolour all should be serviced at least once a year by Miele Service. surfaces. Maintenance covers the following: Cleaning the wash cabinet – electrical integrity, The wash cabinet is largely self- –... -
Page 55: Cleaning The Door And The Door Seal
Cleaning and care To avoid damage to the outer Cleaning the door and the door surface, do not use: seal – Cleaning agents containing soda, The door seal and the sides of the ammonia, acid or chloride dishwasher door are not accessed and cleaned by the spray arm jets. -
Page 56: Cleaning The Spray Arms
Cleaning and care Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be checked and cleaned regularly. Turn the dishwasher off. Remove the spray arms as follows: ... -
Page 57: Checking The Filters In The Wash Cabinet
Cleaning and care Checking the filters in the Cleaning the filters wash cabinet Turn the dishwasher off. The filter combination in the base of the wash cabinet retains coarse soil from the suds solution. This prevents soiling getting into the circulation system and re-entering the chamber through the spray arms. - Page 58 Cleaning and care Replace the filter combination so that To clean the inside of the filter, the flap it lies flat in the base of the wash must be opened: cabinet. Press catches together in the Then turn the handle clockwise until direction of the arrows as shown, and open the filter .
-
Page 59: Problem Solving Guide
With the aid of the following guide, the cause of a problem can be found and eliminated. However, please note: Repairs must only be carried out by Miele Service. Unauthorized repairs could cause personal injury or damage to the machine. Technical problems... - Page 60 Turn the dishwasher back on. Select the desired program. Press the Start button. If the fault message appears again, there is a technical fault. Call Miele Service. The Waterproof system was activated. Waterproof Turn off the water supply.
-
Page 61: Faults In The Water Intake Or Water Drain
Problem solving guide Faults in the water intake or water drain Problem Possible cause and solution One of the following fault messages is displayed: Open water supply The water supply is turned off. Turn on the water supply fully. ... -
Page 62: General Dishwasher Problems
Problem solving guide General dishwasher problems Problem Possible cause and solution The indicator lights and The dishwasher has switched off automatically to display are dark. save energy. Turn the dishwasher on again with the button. The interior lighting The interior lighting has been switched off does not switch on permanently. -
Page 63: Noises
Problem solving guide Noises Problem Possible cause and solution Knocking noise in the A spray arm is hitting the dishware. wash cabinet. Interrupt the program, and rearrange the items which are obstructing the spray arm. Rattling noise in the Dishware is moving around in the wash cabinet. -
Page 64: Poor Cleaning Results
Problem solving guide Poor cleaning results Problem Possible cause and solution The dishes are not The dishes were not loaded correctly. clean. See notes in “Loading the dishwasher”. The program was not suitable for the requirements. Select a more suitable program (see “Program overview”). - Page 65 Problem solving guide Problem Possible cause and solution Dishes are not dry or The rinse aid dosage is set too low or the rinse aid cutlery and glasses are reservoir is empty. spotty. Replenish the reservoir, increase the dosage or change the brand of rinse aid (see “Commissioning, Rinse aid”).
- Page 66 Problem solving guide Problem Possible cause and solution White residue is visible The rinse aid dosage is set too low. on the dishes. Clouding Increase the dosage (see “Settings menu, Rinse occurs on glassware aid”). and cutlery; film can be The salt reservoir is empty.
-
Page 67: Maintenance
Refit the filter and seal. Make sure it This water filter is available from a Miele is fitted correctly. dealer or from Miele Service. Reconnect the water inlet valve to the To clean the filter: water supply. -
Page 68: Cleaning The Drain Pump And Non-Return Valve
Maintenance Cleaning the drain pump and non-return valve If water remains in the wash cabinet after the end of a program, the water has not been pumped away. The drain pump or the non-return valve may be blocked by foreign objects. These are easy to remove. -
Page 69: After Sales Service
In the event of any faults which you cannot remedy yourself, please contact The program update function is your Miele dealer or Miele Service. designed to enable a service technician to update your dishwasher's electronics Contact information for Miele Service in keeping with advances in technology. -
Page 70: Optional Accessories
Cappuccinatore insert The Cappuccinatore insert for the upper basket can be used for cleaning the individual parts of the Miele Cappuccinatore in the dishwasher. Cutlery basket The cutlery basket is placed in the lower basket and can be used to wash... -
Page 71: Electrical Connection
– If necessary, equipotential bonding must be carried out. – If replacing the power cable, use only original Miele replacement parts or a suitable cable with core cable ends. – For technical data, see the data plate or the attached wiring diagram! -
Page 72: Removing The Toe Kick
Electrical connection Power connection options The PG 8130 U / PG 8130i comes equipped with a 14/3 AWG cord for connection to a standard AC 120 V, 60 Hz power outlet with a NEMA 5-15P plug. If available, the dishwasher may be connected to a 2N AC 120/208-240 V, 60 Hz power supply. - Page 73 All work on the electrical resistance for electric current. This connection should be carried out by appliance is equipped with a cord Miele Service. which has an equipment-grounding conductor and a grounding plug. The Unscrew the 2 screws (left and right) plug must be plugged into an and remove the base panel.
-
Page 74: Plumbing
The Miele Waterproof system the connection point) must be Provided your dishwasher has been between 30 and 1000 kPa (4.5 - installed correctly, the Miele Waterproof 145 psi). system will provide extensive protection If the water pressure is lower than against water damage throughout its... - Page 75 Plumbing To avoid any damage to the machine, the dishwasher must only be connected to fully vented pipework. The inlet hose must not be shortened or damaged in any way as it contains electrical components (see illustration).
-
Page 76: Connecting The Water Drainage System
Plumbing Venting the drainage system Connecting the water drainage system The drainage system must be vented if the on-site connection is situated lower – The dishwasher drain is equipped than the guide path for the lower basket with a non-return valve which rollers in the door. -
Page 77: Technical Data
Noise emission values Sound power in LwA 45 dB (A) Sound pressure in LpA 34 dB (A) Test certificates awarded CSA, UL 749, UL 921, Energy Star CE mark Machinery Directive 2006/42/EC Manufacturer's address Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany... -
Page 78: Settings Menu
Settings menu Settings menu for changing Language basic settings The display can be set to appear in one of several different languages. Opening the Settings menu You can change the language in the Switch the dishwasher on with the display via the Language ... -
Page 79: Time Of Day
OK. (see “Settings menu, Network”). You can adopt the current time of day from another Miele@home SuperVision machine. Select the Synchronize menu option. Select the setting you want and confirm with OK. -
Page 80: Water Hardness
Settings menu Water hardness °d mmol/L gr/gal Display Your dishwasher is fitted with a water softener. You need to program the water softener to the water hardness level in your area. – The dishwasher must be programmed for the water hardness in your area. -
Page 81: Rinse Aid
Settings menu Rinse aid External dispensing You can adjust the rinse aid dosage for Activate automatic dispensing of liquid best results. detergent if you have installed the The dispenser can be set between 0 optional external dosing module. and 6 ml. The DOS module comes with a 3 ml is set as factory default. -
Page 82: Temperature Unit
Settings menu DOS flow rate The “Pre-wash” program is offered directly after the venting process is A flow rate of 60 ml/min is set as finished. Start the program in order to standard. The flow rate can be modified dilute and drain any cleaning agent that between 10 and 150 ml/min in escaped into the wash cabinet. -
Page 83: Ecostart
Settings menu Setting the electricity rate times EcoStart Before you can use the EcoStart option, In order to run your dishwasher in the you must set at least one electricity rate most economical way, you can use the time. EcoStart option to take advantage of your electricity supplier's time variable ... - Page 84 Settings menu Deleting the electricity rate times You can delete the settings for an electricity rate time and in doing so deactivate the EcoStart option for this time zone. Use the arrow buttons to select the electricity rate time (R1 – R3) you want to delete and confirm with OK.
-
Page 85: Networking
There are a number of ways of connecting your dishwasher to your – Call up information on the program WiFi network: sequence of your professional machine – Set up a Miele@home network with other WiFi enabled Miele professional machines... - Page 86 OK. automatically. The dishwasher will then revert to the Select the setting you want and Miele@home enabled menu. confirm with OK. If the connection fails, you have Confirm the message with OK.
- Page 87 Once you have activated the Remote function, the option control MobileControl This function is reserved for Miele will be the first option listed under Service and used to add your Settings . professional machine to your network manually. In order to operate the dishwasher with...
- Page 88 Start module activity If you wish to reset all entered settings and values for Miele@home, you can restore the factory default settings on your WiFi module. Any settings that do not affect Miele@home will remain unchanged.
-
Page 89: 2Nd Interim Rinse
Settings menu 2nd interim rinse Refill indicators You can increase the cleaning If you consistently use a Tab detergent performance in the case of stubborn and the refill indicators for salt and rinse soiling by selecting a second interim aid are bothering you, you can rinse. -
Page 90: Autoopen
Settings menu AutoOpen Software version At the end of programs with a drying You can display the electronic software phase (see “Program overview”), the version of your dishwasher electronics door will open automatically a little in for technical support purposes. order to help the drying process. -
Page 91: Demo Mode
For demonstration purposes only! the factory default settings. The dishwasher is fitted with various WiFi module settings (where applicable) demonstration programs for showroom have to be reset separately (see use. “Settings, Miele@home, Module settings”). – Demo mode Demonstration program for Select Reset and confirm with OK. - Page 92 Canada Importer Miele Limited Professional Division 161 Four Valley Drive Vaughan, ON L4K 4V8 1-888-325-3957 Phone: 1-800-803-3366 Fax: www.mieleprofessional.ca professional@miele.ca Miele Professional Technical Service Phone: 1-888-325-3957 Fax: 1-800-803-3366 serviceprofessional@miele.ca Germany Manufacturer Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh 2018-12-04...