Problem solving guide
Problem
The door locking pins
do not retract after the
door has opened auto-
matically.
One of the following
messages appears in
the display:
Fault FXX
Waterproof
Fault F78
62
Cause and remedy
There is a fault with the door mechanism or the door
has not been correctly balanced
Call Miele Service.
The dishwasher can only be used again with the
AutoOpen function switched off. There is a danger
of injury in the unlikely event of a fault with the
opening mechanism.
Before rectifying the problem:
Switch the dishwasher off with the button.
There may be a technical fault.
After a few seconds:
Switch the dishwasher back on.
Select the programme you want.
Close the door.
If the fault message appears again, there is a
technical fault.
Call Miele Service.
The Waterproof system has reacted.
Close the stopcock.
Call Miele Service.
A fault has occurred in the circulation pump.
Switch the dishwasher off for at least 30 seconds
with the button.
Switch the dishwasher back on.
Select the programme you want.
Close the door.
If the fault message appears again, there is a
technical fault.
Call Miele Service.