Table of Contents
Advertisement
Programme options
Optimise standby
"Optimise standby" is activated by
default.
To save energy, the dishwasher will
switch off automatically a few minutes
after the last time a button has been
pressed or after the end of a
programme.
The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.
"Optimise standby" can be switched off
if you prefer. If you do this, the duration
before the dishwasher switches off
increases to 6 hours. Doing this will
increase energy consumption.
Open the door.
Switch the dishwasher off with the
button, if it is switched on.
Press the programme selector button
in and, whilst holding it in, switch
the dishwasher on using the
button.
Keep the programme selector button
pressed in for at least 4 seconds
until the lower right-hand programme
indicator comes on.
If this does not happen, start the
procedure from the beginning again.
64
Press the button 8 times.
The indicator light will flash rapidly 8
times at intervals.
The flashing sequence in the display
shows whether "Optimise standby" is
activated or not.
– : "Optimise standby" is switched
on.
– : "Optimise standby" is switched
off.
Press the programme selector button
if you wish to change the setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Advertisement
Table of Contents
