Optimise Standby - Miele PG 8080 Operating Instructions Manual

Optimise standby

To save energy, the dishwasher will
switch to Standby mode a few minutes
after the last time a button has been
pressed or a few minutes after the end
of the programme. The display and the
indicator lights will go out and only the
Start/Stop indicator will flash slowly.
If the dishwasher is not switched off at
the end of the programme, it will switch
off completely after a few minutes in
Standby mode.
The Optimise standby function can be
deactivated if wished. The display and
indicator lights will not go out and the
duration before the dishwasher
switches off automatically increases to
approx. 6 hours.
Doing this will increase energy
consumption.
 Select the desired setting and press
the middle button to confirm.
The dishwasher will not switch into
Standby mode whilst a programme is
running, if salt or rinse aid needs to
be replenished or there is a fault.
Settings menu
73