Autoopen; Optimise Standby - Miele PG 8083 SCVi Operating Instructions Manual

AutoOpen

To help the drying process, the door
automatically opens a little at the end of
a programme, (except for "Pre-wash",
"Short" and "Beer glasses"). See the
Programme chart.
With the Medium, Intensive and
Glasses programmes, AutoOpen can
only be activated by selecting the
Additional drying function (see
"Additional functions, Additional
drying").
With the ECO programme the door
opens during the drying phase.
This function can be deactivated if
wished.
 Select the desired setting and press
the middle button to confirm.

If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the programme, make
sure that you open the door fully.
Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.

Optimise standby

To save energy, the dishwasher will
switch to Standby mode a few minutes
after the last time a button has been
pressed or a few minutes after the end
of the programme. The display and the
indicator lights will go out and only the
 indicator will flash slowly.
If the dishwasher is not switched off at
the end of the programme, it will switch
off completely after a few minutes in
Standby mode.
The Optimise standby function can be
deactivated if wished. The display and
indicator lights will not go out and the
duration before the dishwasher
switches off automatically increases to
approx. 6 hours.
Doing this will increase energy
consumption.
 Select the desired setting and press
the middle button to confirm.
The dishwasher will not switch into
Standby mode whilst a programme is
running, if salt or rinse aid needs to
be replenished or there is a fault.
Settings menu
77