Table of Contents
Advertisement
Programme options
Optimise standby
"Optimise standby" is activated by de-
fault.
To save energy the dishwasher will
switch off automatically a few minutes
after the last time a button has been
pressed or after the end of a pro-
gramme.
The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.
Optimise standby can be switched off if
you prefer. If you do this the duration
before the dishwasher switches off
automatically increases to approx. 6
hours. Doing this will increase energy
consumption.
Open the door.
Switch the dishwasher off with the
button, if it is switched on.
Press the programme selector button
in, and whilst holding it in switch
the dishwasher on using the but-
ton.
Keep the programme selector button
pressed in for at least four seconds
until the lower right hand programme
indicator comes on.
If this does not happen, start the pro-
cedure from the beginning again.
54
Press the Turbo button eight times.
The Turbo indicator will flash rapidly
eight times at intervals.
The flashing sequence in the display
shows whether Optimise standby is ac-
tivated or not.
– : "Optimise standby" activated
– : "Optimise standby" deactivated
Press the programme selector button
to change the setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Advertisement
Table of Contents
