Table of Contents
Advertisement
Operation
Energy management
To save energy the dishwasher will
switch off automatically 10 minutes
after the last time a button is pressed or
after the end of a programme.
Press the button to switch the
dishwasher back on.
The dishwasher will not switch off
whilst a programme or the FlexiTimer
is running or if there is a fault.
46
End of programme
At the end of a programme, the in-
operation indicator light will flash slowly
with the door shut. The buzzer might
also sound.
The programme has finished when
Finished
appears in the display and
the door has opened slightly (if
applicable).
The drying fan may continue to run for
a few minutes at the end of the
programme.
Open the door completely to re-
engage the door closing mechanism.
You can now remove the load items.
The in-operation indicator light will go
out 10 minutes after the end of the
programme if the door is closed.
If you have deactivated the
automatic door opening function (see
"Settings menu, AutoOpen"), but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.
Advertisement
Table of Contents
