Table of Contents
Advertisement
2nd interim rinse
You can increase the cleaning
performance in the case of stubborn
soiling by selecting a second interim
rinse. This function is not available for
all programmes (see "Programme
chart").
Select the setting you want and
confirm with OK.
Brightness
There are seven different display
brightness settings.
Select the brightness you want and
confirm this with OK.
Volume
A buzzer sequence will sound at the
end of a programme or if there is a fault
as long as the buzzers are activated.
Buzzer in the event of a fault
The buzzer in the event of a fault will
sound four times at intervals with a
short pause between each set of tones.
The buzzer which sounds when there
is a fault cannot be deactivated.
Buzzer at the end of a programme
The buzzer at the end of a programme
will sound four times at intervals with a
short pause between each set of tones.
The volume of the buzzer tones at the
end of the programme can be selected
in seven stages or switched off. If no
volume is selected, the buzzer is
switched off.
Select the
Buzzer tones
Use the arrow buttons to set the
volume required and confirm your
selection with the OK button.
Keypad tone
An audible tone sounds each time a
button is pressed.
The volume for the keypad tone can be
set to one of seven different settings. If
no volume is selected, the keypad tone
is switched off.
Use the arrow buttons to set the
volume required and confirm your
selection with the OK button.
Settings menu
menu option.
89
Advertisement
Table of Contents
