Table of Contents
Advertisement
With the aid of the following guide, most minor problems can be corrected without
contacting Miele. You can save time and money in many cases, as you do not
need to call the Miele Customer Service Department.
The following guide should help you to find the reason for a malfunction or fault,
and to correct it. You should, however, note the following:
Repairs must only be carried out by the Miele Customer Service
Department, an authorised Miele dealer or a suitably qualified technician in
accordance with local and national safety regulations. Unauthorised or incorrect
repairs can cause considerable danger to users.
Technical problems
Problem
The dishwasher will not
start.
The dishwasher stops
during a programme
After the programme
has started, the In-op-
eration indicator light is
not visible.
Cause and remedy
The door is not properly closed.
Push the door firmly shut.
The dishwasher is not plugged in.
Insert the plug and switch on at the socket.
The fuse has tripped.
Reset the trip switch in the mains fuse box or
replace the fuse in the plug (minimum fuse rating -
see data plate).
The dishwasher is not switched on.
Switch the dishwasher on with the button.
The fuse has tripped.
Reset the trip switch in the mains fuse box or
replace the fuse in the plug (minimum fuse rating -
see data plate).
If the mains fuse trips again, call the Miele Service
Department.
The reflector panel was not correctly fitted.
Re-fit the reflector panel correctly (see Installation
sheet).
Problem solving guide
61
Advertisement
Table of Contents
