Display - Miele PG 8133 SCVi Operating Instructions Manual

Guide to the machine

Display

General
The display is used to select or set the
following:
- Programme
- FlexiTimer (delay start)
- Settings menu
The display can show the following:
- The programme stage
- The estimated time left for the
programme to run
- Any relevant fault messages and
information
To save energy, the dishwasher
switches off after a few minutes if you
do not press any buttons during this
time.
Press the  button to switch the
dishwasher back on.
8
Settings menu
The Settings menu is used to alter the
dishwasher's electronics to suit
different requirements. The Settings
menu is accessed by pressing the
 button.
The arrows on the display indicate that
further options are available. You can
use the  arrow buttons next to the
display, as appropriate, to select these
further options.
The OK button is used to confirm a
message or setting and also to move to
the next menu or another level.
The option that is selected will have a
tick  next to it.
To exit a sub-menu, use the  arrow
buttons to select the
confirm with OK.
If you do not press any buttons for
several seconds, the display will revert
to the previous menu. You may then
have to enter your settings again.
option and
Back 