Download  Print this page

Restoring Factory Defaults; Recommended Method - Dell S2500 Owner's Manual

Workgroup laser printer.
Hide thumbs

Advertisement

Restoring factory defaults

You can make changes to printer settings or values by using the menus available through the
Printer Settings Configuration sheet, PJL commands, or the Local Printer Setup Utility. For
more information, see "Understanding the printer menus" in your User's Guide for more
information.

Recommended method

Restore factory defaults through the Reset Factory Defaults menu item in the Utilities
Menu. See "Understanding the printer menus" in your User's Guide for more information.
Alternate method
To restore the original printer settings (factory default settings):
Print a Printer Settings Configuration sheet. See "Understanding the printer menus"
1
in your User's Guide for more information.
Turn off the printer.
2
Open the Top-Front cover on the printer.
3
Hold down the Continue and the Cancel buttons simultaneously while powering on
4
the printer. The LEDs on the printer will cycle.
Once the Error LED is on and the lights do not cycle, release the Continue and
5
Cancel buttons.
Close the Top-Front cover on the printer.
6
The printer factory defaults are restored.
To return to the Home menu, press and hold Cancel until all of the lights cycle. To exit the
menus, turn the printer off.
9 2
Ve ri f y pri nte r se t up

Advertisement

Table of Contents

   Related Manuals for Dell S2500

This manual is also suitable for:

S2500n

Comments to this Manuals

Symbols: 0
Latest comments: