Restoring Factory Defaults; Toner Low - Dell W5300 Workgroup Laser Printer User Manual

Restoring Factory
Defaults

Toner Low

Tray <x> Empty
Tray <x> Low
Tray <x> Missing
USB <x>
Waiting
1565 Emul Error
factory default printer settings.
When factory default settings are
restored:
All downloaded resources
(fonts, macros, symbol
sets) in the printer memory
are deleted.
All menu settings return to
the factory default setting
except:
The Display Language
setting in the Setup
Menu.
All settings in the
Network Menu and
USB Menu.
The toner cartridge is low on
toner.
The specified tray is out of paper.
The specified tray is low on paper. Add paper to the tray to clear the
The specified tray is either
missing or not fully inserted into
the printer.
The printer is processing data
through the specified USB port.
The printer has received a page of
data to print but is waiting for an
End of Job command, a Form
Feed command, or additional
data.
The download emulator version
on the firmware card does not
See also: Restoring factory default
settings
Shake the toner cartridge to utilize
the remaining toner.
Replace the toner cartridge.
Press Go to clear the message and
continue printing.
NOTE: If you do not replace the toner
cartridge, you may experience print
quality problems. Order more toner at
www.dell.com/supplies.
Load paper in the tray to clear the
message.
See also: Loading print media in standard
and optional trays
message.
See also: Loading print media in standard
and optional trays
Insert the tray completely into the printer.
See also: Loading print media in standard
and optional trays
Press Go to print the contents of the
buffer.
Press Menu to open the Job Menu
and cancel the current job.
See also: Canceling a print job
The printer automatically clears the
message in 30 seconds, and then disables