Using Windows 2000 With A Usb Or Parallel Cable - Dell S2500 Owner's Manual

Using Windows 2000 with a USB or parallel cable

When you attached the cable and turned on the printer and computer, the Found New
Hardware Wizard screen appeared on your computer screen.
Insert the Drivers and Utilities CD, and then click Next.
1
Select Search for a suitable driver, and then click Next.
2
Select Specify a location only, and then click Next.
3
Browse to the location of the printer driver on the Drivers and Utilities CD.
4
D:\Drivers\Win_2000\
Replace D:\ with the letter of your CD-ROM drive (for example, type D:\ where D is
the drive letter of your CD).
Click Open, and then click OK.
5
Click Next to install the driver that is displayed.
6
Click Finish when the software is installed.
7
When the Dell Drivers and Utilities screen appears, choose Install the printer for Use
8
on this Computer only (Personal Installation) to install the additional software for
your printer.
When all the files are installed on your computer, the Congratulations screen appears.
Click Print a Test Page to verify printer setup.
9
Click Finish when the test page prints successfully.
10
Close the Drivers and Utilities CD screen.
11
4 8 Sett ing up f o r local print ing