Table of Contents
Advertisement
Browse to the location of the printer driver on the Drivers and Utilities CD.
4
D:\Drivers\Win_2000\
Replace D:\ with the letter of your CD-ROM drive (for example, type D:\ where D is
the drive letter of your CD-ROM drive).
Click Open, and then click OK.
5
Click Next to install the driver that is displayed.
6
Click Finish when the software is installed.
7
Go to "Set up the queue on the server" on page 74.
8
Using Windows Me with a USB or parallel cable
NOTE: Depending on the software and printers already installed on your computer, your screens
may vary from those in the instructions.
If you attached a USB cable, you must install both a USB port driver and a custom print
driver.
Insert the Drivers and Utilities CD.
1
The Wizard automatically searches for the USB driver on the CD and installs it.
NOTE: If you are using a parallel cable, skip to step 3.
After the USB port driver is found, click Finish.
2
Select Automatic search for the best driver (recommended), and then click Next.
3
The wizard searches for a printer driver.
Select your printer and driver from the list on the screen, and then click OK. Use the
4
following table to identify the driver for your language.
7 0
Sett ing up f o r net work printi ng
If your computer
uses this language
English
French
German
Italian
Select the driver from the list
(Replace the D:\ in the table with the letter of
your CD-ROM drive)
D:\DRIVERS\WIN_9X\ENGLISH\LMPCL5C.INF
D:\DRIVERS\WIN_9X\FRENCH\LMPCL5C.INF
D:\DRIVERS\WIN_9X\GERMAN\LMPCL5C.INF
D:\DRIVERS\WIN_9X\ITALIAN\LMPCL5C.INF
Advertisement
Table of Contents
