Job Management; Factory Defaults; Stored Jobs - Dell 5330dn Workgroup Mono Laser Printer User Manual

Factory Defaults

Menu selection: Purpose:
Factory Defaults Returns printer settings to the
factory default values.

4.Job Management

Stored jobs
Menu selection: Purpose:

Stored jobs

Print jobs currently stored in the
hard disk
Job Expiaration
Menu selection: Purpose:
Job Expiration Limits the amount of time a
confidential job stays in the
printer before it is deleted.
RAM Disk Limit
Menu selection: Purpose:
RAM Disk Limit Uses up to 96 MB of printer's
memory for Secure print.
NOTE: If you install an additional
printer memory, you can use your
printer's memory up to 288 MB for
Secure print.
Clear Stored Job
Menu selection: Purpose:
Clear Stored Job Delete jobs currently stored in
the hard disk and RAM disk.
5.Network I/O Ports
This menu lets you configure the network interface installed in your printer. You can reset the network interface and print a configuration page.
Ethernet Speed
2nd Form: When you
l
2nd Form
select Double Form in
Form Menu, this menu is
displayed.
Values:
Do Not Restore Do not Restore: User-
l
defined settings remain.
Restore Now: All menu
l
Restore Now
items are returned to the
factory-default values
except:
Display Language
l
All settings in the
l
Parallel Menu, Serial
Menu, Network
Menu, and USB Menu
Resource residing in
l
flash memory or on
the hard disk
NOTE: All downloaded resources
(fonts, macros, and symbols sets)
in printer memory (RAM) are
deleted.
Values:
User ID1
User ID2
Values:
Off
1 hour
4 hour
24 hour
1 week
Values:
0 MB ~ 96 MB
Values:
Secure Job ALL: All Secure Jobs
and Stored Prints are deleted.
Stored Print
ALL