Download  Print this page

Using Windows 98 With A Usb Or Parallel Cable - Dell S2500 Owner's Manual

Workgroup laser printer.
Hide thumbs

Advertisement

Using Windows 98 with a USB or parallel cable

NOTE: Depending on the software and printers already installed on your computer, your screens
may vary from those in the instructions.
If you attached a USB cable, you must install both a USB port driver and a custom print
driver.
When you attached the cable and turned on the printer and computer, the Add New
Hardware Wizard screen appeared on your computer screen.
Insert the Drivers and Utilities CD, and then click Next.
1
NOTE: If you are using a parallel cable, skip to step 7.
Select Search for the best driver for your device (recommended), and then click Next.
2
Select CD-ROM drive only, and then click Next.
3
After the wizard finds the USB port driver, click Next.
4
When the USB port driver is installed, click Finish.
5
The wizard prompts you to search for new drivers.
Click Next to search for a printer driver.
6
Select Search for the best driver for your device (recommended), and then click Next.
7
Select Specify a location only and browse to the location of the printer driver on the
8
Drivers and Utilities CD.
Use the following table to identify the driver for your language.
If your computer
uses this language
English
French
German
Italian
Spanish
Select the driver from the list
(Replace the D:\ in the table with the letter of
your CD-ROM drive)
D:\DRIVERS\WIN_9X\ENGLISH\LMPCL5C.INF
D:\DRIVERS\WIN_9X\FRENCH\LMPCL5C.INF
D:\DRIVERS\WIN_9X\GERMAN\LMPCL5C.INF
D:\DRIVERS\WIN_9X\ITALIAN\LMPCL5C.INF
D:\DRIVERS\WIN_9X\SPANISH\LMPCL5C.INF
Sett ing up fo r l ocal pri nti ng
51

Advertisement

Table of Contents

   Related Manuals for Dell S2500

This manual is also suitable for:

S2500n

Comments to this Manuals

Symbols: 0
Latest comments: