Using Windows 95 With A Parallel Cable - Dell S2500 Owner's Manual

Highlight the driver, and then select to install the updated driver (recommended).
9
Click Next.
10
Click Next to complete installation.
11
Use the default printer name (for example, Dell Laser Printer S2500) or type a unique
12
name for your printer, and then click Next.
Click Finish.
13
A test page will print automatically. Click YES when the test page prints successfully.
14
Click Finish to complete the installation.
15
Launch the Drivers and Utilities CD: click Start
16
example, type D:\ where D is the drive letter of your CD).
Select SETUP .EXE, and then click OK.
17
When the Dell Drivers and Utilities screen appears, click Install the printer for Use on
18
this Computer only (Personal Installation) to install the additional software for your
printer.
If you are prompted to restart your computer, click Yes.
Otherwise, the Congratulations screen appears.
Close the Drivers and Utilities CD screen.
19

Using Windows 95 with a parallel cable

NOTE: USB support is not available for Windows 95 operating systems.
When you attached the parallel cable and turned on the printer and computer, the Update
Device Driver wizard appeared on your computer screen.
Insert the Drivers and Utilities CD, and then click Next.
1
If a system-compatible driver is found on your operating system, the Wizard installs it.
If no compatible system driver is found on your operating system, click Other
Locations.
5 2 Sett ing up f o r local print ing
Run and browse your CD drive (for