Mindray BeneFusion VP3 Vet Operator's Manual page 19

Infusion pump
Table of Contents

Advertisement

7. AC/DC indicator light
On: The pump is connected to an AC/DC power supply (including shutdown).
Off: The pump is not connected to an AC/DC power supply.
8. Battery indicator light
Steady green indicates that the battery is charging.
Flashing green indicates that the battery is providing power.
Light off indicates that the pump is turned off and not connected to an AC power
supply.
9. <POWER>
Used for turning power on, entering in standby state and turning off operations.
10. <BOLUS>
During infusion, press this key to enter the [Bolus] settings screen.
Under non-running status, press this key to to enter the [Purge] prompt screen.
11. <AUDIO PAUSED>
Pauses alarm sound.
12. <START>
After the infusion set is loaded correctly and the infusion parameters are set,
press this key to start the infusion.
In the [Bolus] settings screen, after bolus parameters are set, press this key to
auto bolus.
13. <STOP>
During infusion, press this key to stop infusion. Infusion stops caused by alarms
(such as occlusion), press this key to cancel the alarm.
14. Handle
15. Door
16. Door holder
Pull it to open the door.
2-3

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BeneFusion VP3 Vet and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents

Save PDF