Notes; Equipment Symbols - Mindray BeneFusion VP3 Vet Operator's Manual

1.1.3 Notes

NOTE

Install the equipment in a position where it can be easily accessed for
inspection, operation and maintenance.
Keep this Operator's Manual near to the equipment for future ease of

reference.

The software was developed in compliance with IEC62304. The
possibility of hazards arising from software errors is minimized.
This Operator's Manual describes the most complete functional

configuration of the equipment. The product you are using may not have
some of the settings or functions described herein.

Do not insert devices that are not specified by the manufacturer into the
multifunction interfaces.

During infusion, the infusion pump can accurately control the rate,
infusion volume and infusion time, and monitor the operation in
real-time, to effectively prevent over currents, under currents and
instances of backflow.

The device is not in touch with the drugs or animals directly. Thus, there
is no need to process Biocompatibility test on it.

1.2 Equipment Symbols

Some symbols may not appear on your equipment.
Refer to instruction
manual/booklet
Alternating current
Both direct and
alternating current
Alarms
Clear/Back
Bolus
Stop
Move up/Increase
ON/OFF
Battery
Direct current
AUDIO PAUSED
Start; start of action
Confirm
Menu
Move down/Decrease
1-5