Table of Contents
Advertisement
4.1.4. Radar stand dimension
The mounting part of ATU should be designed
as shown in the outline drawing of the Antenna
Unit (84-001-300G- *).
These sizes are based on 165 cm tall of service
engineer.
Two drawing below shows front and side view of
radar. Each side of scaffold height is different.
The load capacity of the scaffold has to be 200
kg or more. (Assume weight for 2 people)
The material of the scaffolding is recommended
to be rustproofed iron.
Scaffolding is recommended to set two different heights that assuming to maintain the inter parts of the
radome or a case of removing the upper radome.
Different
height
CABLE ENTRIES
2pcs.
4xM16 BOLTS
φ70
BULL'S EYE LEVEL
4xφ5
DRAIN HOLES
Extract part from outline drawing of the
antenna unit (84-001-300G-*)
ATU mounting bracket recommendation：
Equilateral angle steel (L-angle)
Size：80x80x6 (mm)
Make this dimension less for avoiding interfere with
the bracket from lifting fixture.
Lifting fixture
The height of the
facing
shall be the same
height.
19
500
°
70
°
°
°
60°
°
30°
φ158
°
Figure 4.6:
scaffolds
500
°
°
Advertisement
Table of Contents
