Table of Contents
Advertisement
3) Normally 4
threaded
stable against the wind conditions.
Set the nut to make10 mm space from the end, and fasten the spring clamp around the center of bolt
as shown
below.
10mm
1)
Insert each threaded bolt thru holes from the bottom radome to fix them by the nut inserts by hands.
bolts will be enough while windless. It can insert up to 8 bolts to set radome
Figure 4.16:
Example using 8 bolts.
Caution:
Rotate the antenna to position
feed pipe vertically to ensure no
contact to tip part of antenna
when lifting radome top.
28
Fasten the
spring clamp
at the center
Set the nut
downward
Advertisement
Table of Contents
