Table of Contents
Advertisement
Do not disassemble or modify the equipment.
Fire or electrical shock can occur.
Use only the specified power cable.
Fire or damage to the equipment can result if a different cable is used.
Use the power supply grounded certainly.
Electrical shock or defect of operation can occur.
When a thunderbolt is expected, do not approach a system or
do not touch a hand.
There is a possibility of receiving an electric shock.
A worker's safety is guaranteed however the radar's internal protection devices only protect
against indirect lightning and surges to the radar components. In case of a direct lightning
strike these protection devices may not protect radar or surrounding personnel.
Attach securely protective earth to the unit.
The protective earth (grounding) is required to the AC power supply to prevent electrical
shock.
Do not put liquid-filled containers on the top of the equipment.
Fire or electrical shock can occur if a liquid spills into the equipment.
Establish best possible surrounding space for apparatus.
This helps eliminate performance degradation and failure.
Do not impact the LCD glass.
Serious injury may occur due to broken glass.
RADIATION WARNING LABEL
Warning labels are attached to the equipment. Do not remove any label.
If a label is missing or damaged, contact us for the replacement.
POWER SUPPLY LABEL
100-240 VAC
SINGLE PHASE, 50/60 Hz
POWER CONSUMPTION: MAX. 350W
RATED AMPERE: 3.5-2.4A (100-150VAC)
1.8-1.5A (200-240VAC)
CAUTION
Name:
Radiation Warning Label
Type:
03-142-3201-1
Code No.: 100-266-891-10
ii
Advertisement
Table of Contents
