Ecdis/Radar] Window; Language] Window - Furuno FAR-3210 Instruction Manual

1.2.7

[ECDIS/RADAR] window

Menu item
[Calculate CPA/TCPA]
[Use Legacy TTM ID]
1.2.8

[Language] window

The menu language for the everyday operating screens can be set to English or Jap-
anese. The [Common Installation Setting] menu has English menus only.
Note: This language setting is synchronized with all processor units on the network.
Reboot the synchronized processor unit(s) to use the selected menu language.
1. Access the [Common Installation Setting] menu and click [Basic Setting] on the
tab bar.
2. Click [Language] on the menu bar.
3. Select the appropriate language.
4. Click [Save] on the info bar. Several confirmation messages appear. Click [OK] to
reboot the system. To discard all changes, click [Discard Changes].
1. INITIAL SETTING AND ADJUSTMENT
Description
Keep the default setting. Confirm that the checkbox has
no check mark. If there is a check mark, remove it.
When the checkbox is checked, the TT whose ID is "100"
is output with the ID "0". This checkbox is used only when
needed. For example, the checkbox may be checked
when a non-Furuno ECDIS is connected.
1-11