Table of Contents
Advertisement
10) For reducing from the wind-induced movement, fasten the spring clamp above the base flange and
tighten bottom nut by hand.
* Do not damage the radome gasket when fasten the spring clamps.
* Use the spring clamp properly as examples shown below.
Figure 4.17: Fasten properly by
spring clamp
Bad examples:
Figure 4.20: Space between
Figure 4.19:
Spring
Figure 4.18:
Fasten spring
spring clamp
and radome base
clamp
is inclined
clamp
only partially
flange
Approx. 330mm
Figure 4.21: Completion of opening upper radome
30
Advertisement
Table of Contents
