Table of Contents
Advertisement
4.2.2. Transport
Hold flange area of radome when carrying ATU by hands. Do not hold tube connector.
4.2.3. Lifting fixture
Rotate lifting fixtures from storage (shipping) position to installation position before using it.
[Note: Do not loosen the M16 high nuts. If these are loosening, the internal unit may be damage while
lifting]
Turn the lifting fixture outward
by slightly loosening M16 nut.
And fasten M16 nut before
hoisting the ATU.
Hook shackle into a
hole (φ20) of lifting
fixture to hoist ATU.
These parts should not be
here before mounting ATU
to radar stand.
Do not hold the tube connectors
High nut
Set all 4 bolts with the same length between
nut & nut might make easier for leveling.
23
Use a soft
protective cover
to shield radome
for protect from
scratch and
damage
Advertisement
Table of Contents
