Rear/Bottom Panel - Sony LMD-X2705MD Instructions For Use Manual

Hide thumbs Also See for LMD-X2705MD:
Table of Contents

Advertisement

Rear/Bottom Panel

 HDMI cable holder
Secures the HDMI cable (Ø7 mm or less).
Close
Cable
SERIAL REMOTE RS-232C connector (D-
sub 9-pin, female)
The monitor can be operated according to
control commands sent from connected external
equipment.
REMOTE connector (Stereo mini jack)
The monitor can be operated partially by
connecting the optional Foot Switch FS-24.
SERIAL REMOTE connector (RJ-45)
The monitor can be operated according to
control commands sent from connected external
equipment.
Connect to the network by using a 10BASE-T/
100BASE-TX LAN cable (non-shielded type of 5 or
more category, optional).
Note
Consult with Sony qualified personnel at using
this terminal.
Caution
For safety, do not connect the connector to
peripheral device wiring that might have
excessive voltage.
Follow the instructions for use for this port.
Caution
Do not touch this connector and a patient at the
same time.
Doing so may result in a generation of voltage
that can be harmful to patients if the unit is
malfunctioning.
Always disconnect the power cord before
connecting and disconnecting connectors.
Note
The connection speed may be affected by the
network system. This unit does not guarantee
the communication speed or quality of 10BASE-
T/100BASE-TX.
18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lmd-x2700md

Table of Contents