Table of Contents
Advertisement
Location and Function of Parts and Controls
Front Panel
(On)/ (Standby) switch
Press the side to turn the monitor on. Press the
side to switch the unit to standby state.
Power indicator
Indicator
Operating State
Green
Power on
Flashes in Green
Power on with image displayed
(reduced backlight due to high
temperature)
Orange
Standby
Flashes in Orange
No image displayed (remote standby)
CONTROL button
Displays or hides the operation buttons on the
front panel.
Selects the items depending on the menu types.
OSD menu operation buttons
MENU button
Press to display the on-screen menu.
Press again to hide the menu.
/// buttons
Press to select the items and setting values.
CUSTOM buttons
Turns on or off the assigned function. You can
adjust the assigned function by pressing the /
buttons. (Refer to the custom buttons of the
system configuration menu on page 28 and of
the default setting on page 28.)
The following functions are assigned in the
default setting.
CUSTOM 1: Brightness
CUSTOM 2: Contrast
CUSTOM 3: Flip Pattern
Multi-image display setting buttons
PIP/POP: For displaying the multi-image
display or switching the multi-image display
mode.
SWAP: For swapping between the main
display and the sub display.
16
Advertisement
Table of Contents
