Table of Contents
Advertisement
Preparation
Connecting
1
Make sure that the (On)/
is set to
(Standby).
2
Remove the connector cover.
While pressing the lock levers to the
direction , slide off the connector cover.
Lock lever
Lock lever
3
Connect the connection cable.
The connection cable should be wired to fit
in the cable clamp.
Cable clamp
4
Connect the AC power cord.
Slide the shutter of the AC power connector
to show the AC input connector, and plug the
AC power cord into the AC input connector.
(Standby) switch
20
Shutter
AC input connector
AC power cord
AC plug holder
When using the AC adaptor (optional)
Slide the shutter to show the DC input
connector and insert the DC connector to the
DC input connector until it locks. Then, plug
the AC power cord into the optional AC
adaptor.
DC input connector
Shutter
DC connector
When the cable cover is removed, it can be
used as a cable outlet for the connection
cable and AC power cord.
Cable cover
5
Attach the connector cover.
While pressing the lock levers to the
direction , slide the connector cover.
Advertisement
Table of Contents
