Precaution; On Safety; On Installation; Precautions For Using This Unit Safely - Sony LMD-X2705MD Instructions For Use Manual

Hide thumbs Also See for LMD-X2705MD:
Table of Contents

Advertisement

Precaution

On Safety

Operate the unit only with a power source as
specified in the "Specifications" section.
The nameplate indicating operating voltage,
etc. is located on the rear panel of monitor and
the AC adaptor.
Should any solid object or liquid fall into the
cabinet, unplug the unit and have it checked by
qualified personnel before operating it any
further.
Unplug the unit from the wall outlet if it is not
to be used for several days or more.
To disconnect the AC power cord, pull it out by
grasping the plug. Never pull the cord itself.
The socket-outlet shall be installed near the
equipment and shall be easily accessible.

On Installation

Prevent internal heat build-up allowing
adequate air circulation.
Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation holes.
Do not install the unit near heat sources such as
radiators or air ducts, or in a place subject to
direct sunlight, excessive dust, mechanical
vibration or shock.
Do not place the monitor near equipment
which generates magnetism, such as a
transformer or high voltage power lines.

Precautions for using this unit safely

Some people may experience discomfort (such
as eye strain, fatigue, or nausea) while
watching video images. Sony recommends
that all viewers take regular breaks while
watching video images. The length and
frequency of necessary breaks will vary from
person to person. You must decide what works
best. If you experience any discomfort, you
should stop watching the video images until
the discomfort ends; consult a doctor if you
believe necessary.
Avoid watching the display in environments
where your head may shake, or while you are
walking or performing exercise, because there
is a higher possibility that you experience
discomfort.
Precautions for connecting this unit with
other medical devices
Before you utilize this device and/or connect
this device to any other medical device, please
be aware of and abide by the following
precautions:
(a) Before actually using this device for medical
practice, please check and confirm that you do
not experience any discomfort in your use that
could be disruptive or impeditive in conducting
your intended activity or medical practice.
(b) If you experience or are likely to experience
such discomfort, please refrain from using this
device.
(c) Generally, discomfort (such as eye strain,
fatigue, nausea, or motion sickness) can be
provoked by such factors as quick movements
or shakiness of video picture, focal position of
video pictures, distance between objects and
image capturing modules, user's point of gaze
in video pictures, other varying conditions of
video pictures to be input to this device, and
individual user's health conditions.
Before you utilize this unit, check if the image
of the connected medical device is displayed
properly on the screen of this unit.

To prolong the life of the unit

Turn off the power to preserve the performance
when not in use for a prolonged time.
Cautions for RESPONSIBLE ORGANIZATION
when connecting this equipment to IT-
NETWORK
– connection of the PEMS to an IT-NETWORK that
includes other equipment could result in
previously unidentified RISKS to PATIENTS,
OPERATORS or third parties;
– the RESPONSIBLE ORGANIZATION should
identify, analyze, evaluate and control these
RISKS;
– subsequent changes to the IT-NETWORK could
introduce new RISKS and require additional
analysis; and
– changes to the IT-NETWORK include:
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lmd-x2700md

Table of Contents