Rear/Bottom Panel - Sony LPM-770BP Operating Instructions Manual

Rear/Bottom Panel

a COMPOSITE 1 input and output connectors
(BNC)
IN connector
Input connector for composite video signals or audio
signals.
OUT connector
Loop-through output connector for COMPOSITE 1
input.
b COMPOSITE 2 input and output connectors
(BNC)
IN connector
Input connector for composite video signals or audio
signals.
OUT connector
Loop-through output connector for COMPOSITE 2
input.
Note
When inputting a video signal with the jitters, etc. the
picture may be disturbed. We recommend using the
TBC (time base corrector).
c AUDIO input connectors (3.5 stereo mini jack)
IN connector
Connect to the audio outputs of external equipment
such as a VCR.
d COMPONENT input connectors (BNC)
Input connectors for component video signals.
10-GB
Location and Function of Parts and Controls
7
9 8
7 3 1 2
7 6 5 4
e HDMI input connector
Input connector for HDMI signals.
Note
Use HDMI compliant cable (optional) with HDMI logo.
f EJECT button
While pressing this button, remove the battery.
g Tripod/angle socket hole (1/4-20UNC)
When using a tripod or an angle, secure it to the monitor
with this hole.
When setting the monitor on a tripod or an angle, be
careful that it does not become unstable.
h Battery attachment
Attach the battery NP-F970 or NP-F770.
Note
For safety, do not use a battery other than the following
Sony authorized batteries.
Lithium-ion battery: NP-F970, NP-F770
i DC 12V IN jack (XLR-type, 4-pin)
Connects the DC 12V external power source to use the
monitor.
7