Rear/Bottom Panel - Sony LMD-940W Operating Instructions Manual

Rear/Bottom Panel

1
2
3
a SDI (3G/HD/SD) input and output connectors
(BNC)
IN connector
Input connector for serial digital component signals.
OUT connector
Output connector for serial digital component signals.
Note
The signal from the OUT connector does not satisfy
the ON-LINE signal specifications.
b COMPOSITE input and output connectors
(BNC)
IN connector
Input connector for composite video signals or audio
signals.
OUT connector
Loop-through output connector.
Note
When inputting a video signal with the jitters, etc. the
picture may be disturbed. We recommend using the
TBC (time base corrector).
c AUDIO input and output connectors (stereo
mini jack)
IN connector
Connect to the audio outputs of external equipment
such as a VCR.
12
Location and Function of Parts and Controls
4 5 6 7 8
d PARALLEL REMOTE connector (modular
Forms a parallel switch and controls the monitor
externally.
For details on the pin assignment and factory setting
function assigned to each pin, see page 29.
CAUTION
For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
port. Follow the instructions for this port.
e SERIAL REMOTE connector (RJ-45)
Connect to the network or Sony BKM-15R Monitor
Control Unit by using a 10BASE-T/100BASE-TX LAN
cable (shielded type, optional).
For details, refer to the Interface Manual for
Programmers (saved in the supplied CD-ROM,
Japanese and English only).
9 0
OUT connector
Outputs the audio signal which is selected by the input
select button on the front panel.
When SDI signal is selected, the audio signal of the
channel which is selected in AUDIO SETTING of the
USER CONFIG menu is output.
connector, 8-pin)