Frame Sway Control - Xtreme Manufacturing XR630 Operation And Safety Manual

XR630
Fig 60. Joystick Functions
BOOM
FORK TILT
RETRACT DOWN
SWAY
LEFT
FORK TILT
UP
JOYSTICK
ENABLE
Fig 61. Joystick Functions
Operation Manual
AUX
CONTROL
BOOM
EXTEND
SWAY
RIGHT
AUX
CONTROL
18408-001
Auxiliary Attachment Control

Frame Sway Control

The Sway Enable button on the joystick is used to enable
the machine frame sway before lifting any loads. This button
needs to be depressed at all times while the joystick is moved
sideways for frame sway purposes. The joystick needs to be
centered when the Sway Enable button is depressed, other-
wise if the joystick is off-center it will not work and a message
will pop up on the screen asking to return the joystick to the
center position before operating a function.
Fig 62. Frame Sway Override Switch
Function
Frame sway right Press sway enable & move joystick right
Frame sway left
JOYSTICK
NOTE: Lock the frame sway by placing the travel select lever
ENABLE
in NEUTRAL or applying the service or parking brake.
NOTE: Maximum frame sway is 220 overall or 110 each
direction, left and right.
The Telehandler includes a Frame Sway
Override switch. Improper use of the Frame
Sway Override switch could cause death,
serious injury, or property damage.
The frame sway feature becomes locked and will not operate
when the boom is raised 40° or more. Pressing the Frame Sway
Enable switch on the joystick will override the lockout feature
and allow slow frame sway.
44
Action
Press sway enable & move joystick left
18408-001
Warning
Operator Cab